AFC Mods and Tuning
#16
Registered User
Thread Starter
I have an impact driver that works great for tight screws but there's no way I can get a hammer in there to hit it. Lisle Corporation The valve grinding compound is a great idea. I'll try it again with a ratchet and the bit from the impact driver. Thanks
#17
Registered User
No way you want to use an impact driver there. (Even if you could.)
I meant something like- 1/4" screwdriver bit.
Take the handle piece and use the 2nd item from top to provide torque, tap the contraption lightly with a hammer to shake things loose.
I meant something like- 1/4" screwdriver bit.
Take the handle piece and use the 2nd item from top to provide torque, tap the contraption lightly with a hammer to shake things loose.
Thread
Thread Starter
Forum
Replies
Last Post
Captain
Performance and Accessories 2nd gen only
4
04-15-2011 05:32 PM
kawi600
Performance and Accessories 2nd gen only
4
05-16-2008 07:24 PM