Possible Greensboro Dyno Day March 22, SAT?
01-30-2008, 08:01 PM
#1
Registered User
Thread Starter
Join Date: May 2005
Location: Central NC
Posts: 1,520
Likes: 0
Received 0 Likes
on
0 Posts
Possible Greensboro Dyno Day March 22, SAT?
Some of you guys were asking, so you need to post up. This is not intended to be a big event, its mostly for those of you who want to dyno or need to tune.
Its a dynojet, not in ground. I'm just taking a reading of interest here before I call them again. I did forget to ask about duallys though. I'll try to call them and ask.
$75 for 3runs.
$100 for 1 hour.
There's no minimum, but if there are gonna be alot of trucks, a discount could be available. This might be a good time to dyno again before the big OBX event or the MATR event. I may or may not dyno that day depending on mods I've done.
On Friday, April 9th, my brother and I have 3hours reserved for tuning. This is the day before we go to MATR. Its currently gonna be early in the day and anybody can add on to that or come out and watch. We WILL BE THERE.
Its a dynojet, not in ground. I'm just taking a reading of interest here before I call them again. I did forget to ask about duallys though. I'll try to call them and ask.
$75 for 3runs.
$100 for 1 hour.
There's no minimum, but if there are gonna be alot of trucks, a discount could be available. This might be a good time to dyno again before the big OBX event or the MATR event. I may or may not dyno that day depending on mods I've done.
On Friday, April 9th, my brother and I have 3hours reserved for tuning. This is the day before we go to MATR. Its currently gonna be early in the day and anybody can add on to that or come out and watch. We WILL BE THERE.
01-31-2008, 06:05 AM
#4
Registered User
Thread Starter
Join Date: May 2005
Location: Central NC
Posts: 1,520
Likes: 0
Received 0 Likes
on
0 Posts
Foreign Automotive right off Wendover in the "Motor Mile". The big auction center is right behind them.\
3909 West Wendover Ave.
Greensboro NC 27407
3909 West Wendover Ave.
Greensboro NC 27407
01-31-2008, 08:08 AM
#7
Registered User
Join Date: Jan 2006
Location: Shelby NC
Posts: 583
Likes: 0
Received 0 Likes
on
0 Posts
Would like to come to the Dyno Day but won't know for sure untill closer to the day so put me in as a maybe. Unless something major comes up though we will be at MATR 08.
Trending Topics
02-17-2008, 03:37 PM
#11
Registered User
Join Date: Oct 2006
Location: Linwood, NC
Posts: 692
Likes: 0
Received 0 Likes
on
0 Posts
Foreign Automotive right off Wendover in the "Motor Mile". The big auction center is right behind them.
3909 West Wendover Ave.
Greensboro NC 27407
Thats what Keegan had it one of his earlier post. Time.......I'm going to say 8 to whenever unless Keegan knows otherwise. How is the new tranny treating you?? I'm guessing you got a billet input and output with it.
3909 West Wendover Ave.
Greensboro NC 27407
Thats what Keegan had it one of his earlier post. Time.......I'm going to say 8 to whenever unless Keegan knows otherwise. How is the new tranny treating you?? I'm guessing you got a billet input and output with it.
02-17-2008, 10:43 PM
#12
Registered User
Just picked it up from Phil around 7:30 tonight. Haven't been able to play with it much yet, but so far seems like a big difference. I love the lock-up switch. Went with the billet input. Decided to stay with the stock intermediate and output. If I do ever break the output it is not that big of a deal to change it.
You can always loan it to us and we will tune her 
02-18-2008, 01:58 PM
#15
Registered User
Join Date: Dec 2006
Location: Camp Pendleton, CA
Posts: 962
Likes: 0
Received 0 Likes
on
0 Posts
HAHAHA I wish I was that guy. I want it to be dialed in but their are about 3 people I'd trust with it besides myself. And I'm not gonna put it on them.