Natl. and Regional Chapters / Special Events Discuss events and rallies here. Also discuss your local and regional chapters.

SLC Dyno Day a success

Thread Tools
 
Search this Thread
 
Old 04-19-2003, 05:32 PM
  #1  
Registered User
Thread Starter
 
EricBu12's Avatar
 
Join Date: Apr 2002
Location: Salt Lake City, UT
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
SLC Dyno Day a success

Had about 10 people at Red Robin at 10:30 today, Had hamburgers and BS Then a run over to Phantom Motor Sports who Never heard of The TDR or how well the Cummins does. We showed them!! <br>When Casey did his thing, the fire alarm in the office made the Fireman come out!! They had fans but nothing compared to other places.... We did a total of 8 runs and had a lot of fun.<br><br>I started it off with my EZ at 268 and 552 torque and then the EZ and the BLuechip 4 wire and topped out at 331 and 817 Torque.<br>Some others did:<br><br><br>Name Mods Run 1 and #2<br><br>D. Rawson new 55 turbo, 0 plate, 370 inj. did 532 and 518<br><br>Mike H EZ and 275 Inj Dtt Tranny 316 and 309<br><br>Chuck Edge Comp 275 inj. 363 and 352<br><br>Jerry H. Stock, - Muffler 208 and 206<br><br>Casey C. ('95 Ford) Inj. H2e Turbo Nit. Prop. Chip 573 and 572<br><br>Steve (Heberam) HX 50 Super MTL inj. DD Pump 620 and 680<br><br>James, (02 Ford) 140H chip and 5&quot; ex. 320 and 317<br><br>Hebers Second Run with a little Nitrous<br><br><br><br>Phox's Lifted Ram<br><br><br><br>The Red Robin We went To......<br><br><br>
Old 04-19-2003, 07:12 PM
  #2  
Registered User
 
Idaho CTD's Avatar
 
Join Date: Nov 2002
Location: Boise, ID
Posts: 392
Likes: 0
Received 0 Likes on 0 Posts
Re:SLC Dyno Day a success

Looks like the 50 boys found a few new horsies. Good job Dee and Steve. From the looks of it there is a pretty stout furd running around there too.<br><br>Good showing everyone ;D<br>Nathan
Old 04-19-2003, 07:54 PM
  #3  
Registered User
 
HeberRam's Avatar
 
Join Date: Nov 2001
Location: Heber, Utah
Posts: 389
Likes: 0
Received 0 Likes on 0 Posts
Re:SLC Dyno Day a success

Nate...I still got a little more tweaking to do, ( bigger nozzels) . Not bad for a &quot;single&quot; charger at 4700' elevation...I would have like to try those EDM's #5 . ;D ;D This was only a shake down for the poor &quot;HeberRam&quot;....More to come at MM.

Steve

P.S. Thanks Eric for the get together. It was fun...Time to take a bath.
Old 04-19-2003, 08:18 PM
  #4  
DTR Advertiser
 
Don M's Avatar
 
Join Date: Jun 2002
Location: In the Shop
Posts: 3,347
Received 1 Like on 1 Post
Re:SLC Dyno Day a success

Yepper the 50/55 is a great turbo. Works very well in our applications. Back two yeas ago Donnelly installed a 55 and had the HP pretty well cranked up for the time (609HP)<br><br>It has been reborn now with the smaller housings to help spool up, but the same basic turbo is still there.<br><br>Dee and Steve you guys kicked butt today. Very good indeed.<br><br>Nathan,<br><br>Not many Fords can run as well as Caseys did today, thats for sure.<br><br><br>Don~<br><br>
Old 04-19-2003, 08:19 PM
  #5  
Administrator
 
phox_mulder's Avatar
 
Join Date: May 2002
Location: Sandy, Utah
Posts: 6,522
Likes: 0
Received 1 Like on 1 Post
Re:SLC Dyno Day a success

Here's a couple more pics of HeberRams smoke show

I'm still blowing black out of my nose, probably took a couple years off my life standing back there.

One of these days I'll get to smoke as well.

Great meeting all of you, need to do it again and get the rest of the Utah group out.

phox

[img width=600 height=450]https://www.dieseltruckresource.com/yabbse/gallery/albums/userpics/IMG_0030.JPG[/img]
[img width=600 height=450]https://www.dieseltruckresource.com/yabbse/gallery/albums/userpics/IMG_0029%7E0.JPG[/img]
Old 04-19-2003, 08:24 PM
  #6  
Administrator
 
phox_mulder's Avatar
 
Join Date: May 2002
Location: Sandy, Utah
Posts: 6,522
Likes: 0
Received 1 Like on 1 Post
Re:SLC Dyno Day a success

sorry about the huge pics, thought I sized them down enough.
(New Camera, not used to it yet)

Here's the Ford's Smokeshow.
(Didn't get pics of DRawson's smoke that brought out the Fire Department though)
(They taped up the smoke detector after Dee's run,
would have been interesting to get the firetruck on the dyno ;D )

phox

[img width=600 height=450]https://www.dieseltruckresource.com/yabbse/gallery/albums/userpics/IMG_0023.JPG[/img]
Old 04-19-2003, 09:06 PM
  #7  
Administrator
 
RATTLINRAM's Avatar
 
Join Date: Aug 2001
Location: Disputanta, Virginia
Posts: 3,529
Likes: 0
Received 2 Likes on 2 Posts
Re:SLC Dyno Day a success

[quote author=phox_mulder link=board=12;threadid=13794;start=0#129837 date=1050801897]<br>sorry about the huge pics, though I sized them down enough.<br>(New Camera, not used to it yet)<br>[/quote]<br><br>I resized the photos to make it easier to read the thread. ;D
Old 04-19-2003, 09:22 PM
  #8  
Administrator
 
phox_mulder's Avatar
 
Join Date: May 2002
Location: Sandy, Utah
Posts: 6,522
Likes: 0
Received 1 Like on 1 Post
Re:SLC Dyno Day a success

[quote author=RATTLINRAM link=board=12;threadid=13794;start=0#129852 date=1050804387]
[quote author=phox_mulder link=board=12;threadid=13794;start=0#129837 date=1050801897]
sorry about the huge pics, though I sized them down enough.
(New Camera, not used to it yet)
[/quote]

I resized the photos to make it easier to read the thread. ;D
[/quote]

Thankya kindly.

Figured out the sizing for the next time I post pics.
Was going by file size instead of pixels :.

phox
Old 04-20-2003, 12:06 AM
  #9  
Registered User
 
Bart Timothy's Avatar
 
Join Date: Jun 2002
Location: West Jordan, Utah
Posts: 774
Likes: 0
Received 1 Like on 1 Post
Re:SLC Dyno Day a success

I had a good time and would have dynoed myself except for having to go to a family function which I was already an hour late for, as it was. <br><br>Good dyno numbers by everyone there, including the Fords.<br><br>May Madness is looking to be one hot competition, judging by SLC's small showing.
Old 04-20-2003, 09:52 AM
  #10  
Registered User
 
chuck3's Avatar
 
Join Date: Apr 2002
Location: West Jordan, UT
Posts: 497
Likes: 0
Received 0 Likes on 0 Posts
Re:SLC Dyno Day a success

Bart, sorry you didn't get to run.<br> Great #,s by Dee &amp; Steve, awesom smoke show by Steve, remind me to NEVER stand beside his truck during a run again, I was 5 ft away and after 5 seconds into the run I could not see it or anything for a couple minutes.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
routerguy99
3rd Generation Ram - Non Drivetrain - All Years
4
03-26-2014 08:19 PM
Rally2
General Diesel Discussion
4
05-01-2010 12:27 AM
nate_88
Performance and Accessories 2nd gen only
13
09-11-2009 08:04 PM
BuildingBoost
3rd Gen High Performance and Accessories (5.9L Only)
12
08-02-2007 12:55 PM
Dodge359
Performance and Accessories 2nd gen only
2
07-05-2007 06:04 PM



Quick Reply: SLC Dyno Day a success



All times are GMT -5. The time now is 11:09 PM.