INDTR July Meeting
Re:INDTR July Meeting
[quote author=SolidJunkMM link=board=12;threadid=16418;start=30#162971 date=1058928242]<br><br>Darrel, Are you missing any tools?
<br>[/quote]<br><br>Haven't noticed anything yet but it wouldn't be the first time. :
:-[<br><br>You guys are going to be on your own for August. I've got too much going on in the next 2 months to be able to make any plans.
I'm sure you guys can come up with something.
As it looks right now I'm not even sure if I can make it to Schied's. :'(<br><br>DB
<br>[/quote]<br><br>Haven't noticed anything yet but it wouldn't be the first time. :
:-[<br><br>You guys are going to be on your own for August. I've got too much going on in the next 2 months to be able to make any plans.
I'm sure you guys can come up with something.
As it looks right now I'm not even sure if I can make it to Schied's. :'(<br><br>DB
Re:INDTR July Meeting
I popped the hood yesterday at work to tinker w/the pump and try to chase down a boost thing and your socket set was still sitting on the radiator. :
Ya want me to UPS them down to ya? If so PM me w/ your work address and I'll send them from work.<br><br>New tires ride good. Insurance guy is coming to look at it Thurs. I think I need to get one of these.<br>http://www.turnoverball.com/ Follow the link to the custom flatbeds. ;D 8)
Ya want me to UPS them down to ya? If so PM me w/ your work address and I'll send them from work.<br><br>New tires ride good. Insurance guy is coming to look at it Thurs. I think I need to get one of these.<br>http://www.turnoverball.com/ Follow the link to the custom flatbeds. ;D 8)
Re:INDTR July Meeting
You sure it's not your socket set? I'll check when I get home but I don't think I'm missing mine.<br><br>Those Elite truck beds are awesome very sexy. 8)<br><br>I'll check my toolbox in the AM and let you know.
<br><br>DB
<br><br>DB
Re:INDTR July Meeting
I was one of the 4 Dodge guys, my first meeting. I hope to be able to make some more.<br>I remember the socket set I believe it was used to prop the fan up. <br>By the way when I got home and unloaded the welder, I used it to weld up a hitch for a friends atv. All was going good until the wire just started coming out....hmmm. I raised the spool cover and there was a rats nest in there.
The wire (10lb roll) had come unspooled from the trip and the bouncing. I worked on it for a couple of hours and finally got it straightened up. Note to self..Self, put tape over spool before hauling wire welder. Now the rest this is the second time this has happened :
. The first was back in the woods fixing a friends atv after hauling it and the generator back through the swamp. You would have thought I would have remembered this time. lol.<br>Hope to see you guys again.
The wire (10lb roll) had come unspooled from the trip and the bouncing. I worked on it for a couple of hours and finally got it straightened up. Note to self..Self, put tape over spool before hauling wire welder. Now the rest this is the second time this has happened :
. The first was back in the woods fixing a friends atv after hauling it and the generator back through the swamp. You would have thought I would have remembered this time. lol.<br>Hope to see you guys again.
Thread
Thread Starter
Forum
Replies
Last Post
Ryan
Natl. and Regional Chapters / Special Events
61
Jun 24, 2003 09:30 PM
DarrellB
Natl. and Regional Chapters / Special Events
34
Mar 15, 2003 12:48 AM
DarrellB
Natl. and Regional Chapters / Special Events
62
Feb 10, 2003 10:52 AM



These ARE my socket ;D<br><br>Possesion is 9/10 of the law. ;D ;D
:
<br><br>I did send it back UPS today though.<br><br>Joe
