MN TDR/DTR guys
#1
Registered User
Thread Starter
Join Date: May 2004
Location: Ramsey Minnesota
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
MN TDR/DTR guys THIS HAS CHANGED TO A DYNO DAY
Alrighty guys, Andy Martenson said to post away...so here goes....Lets see a big turn out!
Gentlemen,
Amianthius reciently called me and informed me that he can get ahold of a portible Mustang MB250 Dyno. He is willing to pull this beast up for the July 10th gathering.
One hitch, He needs at least 10 trucks to make it worth his time.
Details: $50 for your first run, 2 pulls with the optical pick-up so you will have torque readings. $25 for 2 additional pulls, take the truck off...tune...try again...etc.
Same as before...bring your Muncie stuff.....Anyone that wants to work on stuff....bring it.
Anyone that wants to purchase anything....talk to Aron or Tim.
Start time: 10am
Directions: Better than before....
Depending on how you come....
101 north, take 10 east. The first set of stop lights (171st) take a left. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
10 West: to 171st take a right. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
10 East: to 171 take a left. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
169 South: Take 10 East to the first set of stop lights (171st) take a left. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
If you can't find it give us a call at
Josh: 612 232 2061
Tim at Torque Diesel Performance: 763 441 7581
Josh
All are welcome, if it's a diesel, bring it!
Gentlemen,
Amianthius reciently called me and informed me that he can get ahold of a portible Mustang MB250 Dyno. He is willing to pull this beast up for the July 10th gathering.
One hitch, He needs at least 10 trucks to make it worth his time.
Details: $50 for your first run, 2 pulls with the optical pick-up so you will have torque readings. $25 for 2 additional pulls, take the truck off...tune...try again...etc.
Same as before...bring your Muncie stuff.....Anyone that wants to work on stuff....bring it.
Anyone that wants to purchase anything....talk to Aron or Tim.
Start time: 10am
Directions: Better than before....
Depending on how you come....
101 north, take 10 east. The first set of stop lights (171st) take a left. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
10 West: to 171st take a right. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
10 East: to 171 take a left. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
169 South: Take 10 East to the first set of stop lights (171st) take a left. Go down one street to Ulyssis take a left (the only way) the shop is on the right towards the end of the street.
If you can't find it give us a call at
Josh: 612 232 2061
Tim at Torque Diesel Performance: 763 441 7581
Josh
All are welcome, if it's a diesel, bring it!
#2
Registered User
Join Date: Mar 2003
Location: Minneapolis, MN
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
I'll be there Josh, and hopefully several others will be too.
If anyone is planning any work, let me know, I can most likely bring any tools that would be necessary.
Lets have a great turnout!!
If anyone is planning any work, let me know, I can most likely bring any tools that would be necessary.
Lets have a great turnout!!
Trending Topics
#10
Registered User
Join Date: Mar 2003
Location: Minneapolis, MN
Posts: 717
Likes: 0
Received 0 Likes
on
0 Posts
Well guys, here is the dyno day everyone has been asking me for! Let's have a big turnout and make this a great event!
BTW,
Thanks to Josh for all your work to put this event together.
You can count me in for the dyno if everyone promises not to laugh at the stock numbers.
Need to put down a "baseline" you know.
Andy
BTW,
Thanks to Josh for all your work to put this event together.
You can count me in for the dyno if everyone promises not to laugh at the stock numbers.
Need to put down a "baseline" you know.
Andy
#13
Registered User
Join Date: Mar 2004
Location: Lake Superior Twin Ports MN and WI
Posts: 62
Likes: 0
Received 1 Like
on
1 Post
Man, if I can scrape up enough cash, I may even allow myself to put down some mean stock truck numbers!!!!
I'll be bringing cases of Power Service Diesel Kleen if anyone wants any.
I'll be bringing cases of Power Service Diesel Kleen if anyone wants any.