Dodge Diesel - Diesel Truck Resource Forums - View Profile: oliver foster

oliver foster oliver foster is online now

Registered User

Visitor Messages

Showing Visitor Messages 11 to 20 of 40
  1. halfpint23
    06-29-2017 02:36 PM - permalink
    I am still looking for an engine bay harness for the truck described in my original message. If you know of (or have) one, please let me know.
    Kate Triplett
  2. halfpint23
    06-22-2017 11:39 AM - permalink
    Wiring demons are eating me alive on the 96 3500. Too many idiots in Canada hacked up the harness right at plug into PCM, and they evidently tweaked out some of the pin sockets in the plugs as well.
    Too many intermittents. Too many issues. NEED to get a new (or at least unsullied clean etc) harness for under the hood/engine bay. If the line(s) that run down to transmission is available, those would be good to have as well..
    Email is great, [email protected]
    We are in WA State
    Does you have the harness I need? 1996 3500 4WD with 47RE transmission.
  3. rlyons
    06-09-2017 07:47 PM - permalink
    Oliver, would you happen to have the vaccum sensor under the left hood hinge on a 92?
  4. LBourque
    01-29-2017 08:10 AM - permalink
    I'll get the money order tomorrow,Monday. Thanks.
  5. eljefedavies
    12-14-2016 10:26 AM - permalink
    Oliver, I am in the need of a passenger side door lock mechanism and arm rest for a 93 extended cab.
    I would prefer Red but I can use any color.

    Thanks Jeff Davies [email protected]
    530 721-2122
  6. edwinsmith
    11-28-2016 11:31 AM - permalink
    Oliver: can you ask the delivery driver to place the valance in the bed of the pickup? I am on my way to San Francisco for a week. I hope you had a good Thanksgiving.

  7. edwinsmith
    11-17-2016 07:26 PM - permalink
    Hi Oliver. I need the front valance which is the piece of body work below the grille just above the frame. I have an 89 that I'm needing to put the later model grille on to accommodate 2 fans I put in front of the A/C condenser.

    I also need the windshield washer nozzles if they're OK.

    NtJman said that you had these. What would you want for them?

  8. b55
    11-09-2016 09:03 AM - permalink
    Hi Oliver. Any chance you still have any of those steering box brackets (part #52037876)? If so, let me know how much (with shipping to bay area, California), so we can work this out.
  9. TruckYou
    08-16-2016 05:51 PM - permalink
    Hey Oliver foster. I just saw your comment. If you could dig up a spare nut for the steering gear box that would be a huggge help. I measured the threaded shaft on the gear box with my calipers, but it seems to be a goofy size. Inside thread to inside thread on that stud measurea approx. .830 thousandths
  10. cougar
    08-11-2016 02:39 PM - permalink
    Do you happen to have a rear transmission mount plate?

About Me

  • About oliver foster
    Truck Brand
    Truck Model
    3/4 ton
    Truck Year
    Truck Mods
    Bfaf, Edge Attitude w/ juice, Banks high ram and monster 5" exhaust, Reunel front and rear bumper, front bumper w/ winch
  • Signature
    '01 QCLB, 4x4 NV.... SOLD
    '95 2500 RCLB 12V/NV-45 4x4, 3.54
    '95 3500 EC/Dually 12V/NV-45 4x4, 3.54
    '91.0 W-250 RCLB, 'Rag, 3.54
    '85 W-350 crew, '90 12V/Rag, Cooler Tubz, 6' lift, 37x13.5, D/60F-D/80, 4.10
    '85 W-350 crew, '90 12V/NV-45, HX-35, 24V intercooler, tubes, boots and I-horn, airbags over springs at all 4s, 3.07s
    '89 Ramcharger '92 12V/Rag with D-60/70 3.54s
    '92 W-250 12V auto, yard plow truck 87,xxx MILES!
    '89 W-350 Dump 12V, 'Rag, Yard, Dirt/Firewood shuttle


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 11:45 AM
  • Join Date: 12-30-2008
  • Referrals: 1


Showing Friends 1 to 5 of 5

All times are GMT -5. The time now is 12:42 PM.

© 2018 MH Sub I, LLC dba Internet Brands
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.