Dodge Diesel - Diesel Truck Resource Forums - View Profile: oliver foster

oliver foster oliver foster is online now

Registered User

Visitor Messages

Showing Visitor Messages 1 to 10 of 46
  1. Dan s
    01-14-2019 02:42 PM - permalink
    I need a steering column for a 1990 w250. Thanks for your help
  2. oliver foster
    12-23-2018 09:03 AM - permalink
    Not a long shot at all.

    I have a very nice, stripped extra cab, cab from Montana here along with the W-250 4x4 frame.
    I sent you a PM.
  3. Reckless07
    12-23-2018 12:02 AM - permalink
    I know it's a long shot, but I'm looking for a club cab in good shape for my '93. Got an '86, 318 4spd minus bed, rear suspension and some cosmetics available to trade if interested.
  4. garrettp62
    10-24-2018 10:00 AM - permalink
    bc mine doesnt have a heater core or anything ac\heat related in it so i want to put heat back in it
  5. garrettp62
    10-24-2018 09:58 AM - permalink
    where does the coolent come out of the motor to go to the heater corein an 89 d250 with the cummins
  6. garrettp62
    09-26-2018 09:15 AM - permalink
    do you have inner fender wells for an 89 d250
  7. TJE
    06-24-2018 01:18 AM - permalink
    Hello sir! I'm in bad need of an A/C hose for my truck! I need the one coming from the compressor to the condensor...I need the fittings. I can get a new hose part made.

  8. DieselVeins
    06-06-2018 11:12 AM - permalink
    Yes its a 2000 with the gray interior
  9. DieselVeins
    06-06-2018 10:20 AM - permalink
    I posted this early March and you said you might be able to help because you might have factory spares:
    Its time to replace the plastic piece that is under the steering wheel and that little cubby hole by the shifter to the left of the glove box, They have cracked like all the other plastic in these trucks and the clips have mysteriously worn out causing me to keep them in place with sheet rock screws. LMC truck and Geno's don't have them. Has anyone replaced them or know where to purchase new ones?
  10. Kerley
    04-14-2018 05:50 PM - permalink
    Oliver, would you have a"plastic frame assembly core" to fit a 1998 dodge ram 2500/ cummins?

About Me

  • About oliver foster
    Truck Brand
    Truck Model
    3/4 ton
    Truck Year
    Truck Mods
    Bfaf, Edge Attitude w/ juice, Banks high ram and monster 5" exhaust, Reunel front and rear bumper, front bumper w/ winch
  • Signature
    '01 QCLB, 4x4 NV.... SOLD
    '95 2500 RCLB 12V/NV-45 4x4, 3.54
    '95 3500 EC/Dually 12V/NV-45 4x4, 3.54
    '91.0 W-250 RCLB, 'Rag, 3.54
    '85 W-350 crew, '90 12V/Rag, Cooler Tubz, 6' lift, 37x13.5, D/60F-D/80, 4.10
    '85 W-350 crew, '90 12V/NV-45, HX-35, 24V intercooler, tubes, boots and I-horn, airbags over springs at all 4s, 3.07s
    '89 Ramcharger '92 12V/Rag with D-60/70 3.54s
    '92 W-250 12V auto, yard plow truck 87,xxx MILES!
    '89 W-350 Dump 12V, 'Rag, Yard, Dirt/Firewood shuttle


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 11:17 PM
  • Join Date: 12-30-2008
  • Referrals: 1


Showing Friends 1 to 5 of 5

Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.