Time for some work
 

The rest of March is booked for me but I have the following things that are in need of install / adjusting, maybe sometime in early April???

1) Edge Juice w/ Attitude

2) 2" front leveling spacers

3) New rims and tires (thanks TJ)

4) Valve springs adjusted, they have never been done and I am pushing 195k

5) maybe a new exhaust manifold if I get it in time.

6) Remove Silencer Ring

Let me know. I am a diesel dummy so I need help.

Well what do u wat to do with ur truck...everyday driver..work..drags...etc

you could have that in one package.

[duhhh]This is true[duhhh]

Its a daily driver that tows on occasion. I have collected the parts that are on the list and need a hand putting them in.

well from what i know we have done it all

boots, i think chris knows what he wants his truck to do.. appears he was just asking when he could get in and start installing some of the stuff.

the hardest part of that whole project is drilling the exhaust manifold for the temp probe and not messing up the turbo, but since you have a new one to put in as well, you have a very easy install day ahead of you

Anyone in the BelAir area want to help with a Edge install this afternoon? I think I can do it myself but would love a hand as I am brand new to diesel trucks / engines.

pm sent......

Thanks for the offer but after two weekend of frustration on the 8.8 install in the jeep if one little thing went wrong I would burn the truck to the ground.[dummy]

that cause you should have went with a 9":cool:
what kind of jeep were you puttin it in?

I am kind of in the same boat as well. I wish I was not working this weekend. I would have gladly tried to help out. I am in the area but working the night shift this weekend. Getting ready to roll out again now.

Drilling and tap looks to be the hardest after reading the distructions. I have to get the tool/bit to tap it.

Peace

99 TJ I broke the carrier in the D35 so I upgraded.[guitar] Gonna try to take it out next weekend and see what breaks next.

let me know when you guys want to drill and tap the manifold i have done a number of them