Let me know if you have a pair of wheels and tires that you might want to trade or sell. I still need two tires... Thanks

 

got the rear all bolted together, took it for a spin around the block. had to put the rear duals on the front (nice wide stance ) also made me a cool 24v style intake horn. took the front off so i can remove the ac stuff and so brett doesnt have to do too much when changing the head and cam out

 

looks like progress I tell ya, maybe I will get a look at it in person next week, I'll be down in Pasadena for a pary down off north shore on eagle hill road, you are welcome to stop by for a beverage of choice and some food. pm me for the house number.

 

heres a few more pics finally got the front down

 

finally got a pic of the front lowered down

 

i guess i should put an update here. the new head, cam, manifold is on. truck is still seating down bretts. goin to start building the twins once i build my funds back up.

 

started fabbing the twins, if anybody else is going to do this i will have a spare head with manifold. makes it much easier

 

twins are done and the truck is going in for paint. so far ive seen 45 psi of boost at about 3k rpms. hopefully i can get a better load on the engine since whenever i laid into it the tires would spin. The rear end would hop off the ground on every bump. also got an air dog 150 put on truck starts right up even on one half charged battery. i still need to finish the gauges, and install the airbags

 

x-mas came around again. the rear air bags and brackets came in, along with new gauges and intake. im picking up leonards seats out of his wrecked truck. so im going to have 4 buckets seats instead of 2 and a bench and in the middle of the rear seats is going to be a nice big sound system.

 

hopefully we can get your truck wrapped up and the hot side of my twinnie twin twins done.... that would be alot more productive than last weekend at frostburg.

 

just spent the last 3 hours building this. it wasnt that hard at all. i have egt, boost, drive pressure, tank pressure, bag pressure

 

Nice, and what are you building again?

 

WOW thats a nice piece of work right there! can i borrow your blueprints? hahaha i also like how the gauges are angled to the driver, must have been alot of planning right? at least you know the difference in an engineering and construction student now. you = duct tape or passenger hand mount, me = a beautiful mount like that.

 

got the new back seats installed, no more bench for me. they came out of leonards truck

 

dang bobby you wasted not time on those things you just picked them up around 1130 this morning. the ones in the back look like they have a higher back than the ones in the front you might want to swap them cause the lower back would allow them to sit better against the window.