finally i have all the right parts in my pump for the 3200rpm spring but it wont start any ideas

 

Got power to the shutoff solenoid?

Are you sure the throttle lever is indexed correctly? Did you put the full power screw back where you found it?

 

Im Not Sure What A Shutoff Solenoid Is But I Have Played With The Full Power Screw And It Is Close To Where It Was Before I Believe It Is Very Close To Being Indexed Correctly But Im Not Sure It Should Start Tho I Just Dont Know Why

 

The shutoff solenoid is the thing near the back of the pump with wires on it. Make sure it has power when the key is turned on.

If you have power there then the problem is your throttle lever indexing, try going a spline tighter.

 

ok i will try that how do you change the throttle lever indexing

 

Take the throttle lever off and put it back on one spline tighter.

 

thanks for the advice it was the shutoff solenoid i finally got my truck tuned today and it made 34psi on the stock turbo we were amazed the egt's were a bit high but a intercooler and a big exhaust will fix that i hit 1650 on my egt gage so kinda high but all is good thanks a bunch