HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

Throwing codes with Edge Attitude

Old May 8, 2007 | 08:01 AM
  #1  
cincydiesel's Avatar
Thread Starter
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
Joined: Jan 2005
Posts: 2,187
Likes: 0
From: Ohio: Home of the disappointing sports teams
Throwing codes with Edge Attitude

Yesterday I was hooking up my motorcycle trailer and noticed the trailer lights were not working. So I decided to check the fuses, sure enough I had a blown trailer running lamp. In the process of changing the fuse I some how disconnected the 10amp transmission relay fuse that my Edge Juice is tapped to. Without noticing I did this I drove about 20 feet and noticed the engine light was on. I amediatly checked for codes and the ecm is throwing about 15 codes. I noticed that the Attitude was not on so right back to the fuse box I go. I then noticed that transmission relay and Edge were disconnected. I plugged everything back up however the codes are still there and the engine light went off but not right away. The codes were not there in the morning because I have been checking every morning as a precaution since I just installed the Edge a few days ago. I'm sure the reason for the codes is because of the transmision relay fuse being pulled however the codes will not go away. The truck is running great, do I need to worry?
Reply
Old May 8, 2007 | 12:12 PM
  #2  
Dodgezilla's Avatar
Registered User
 
Joined: Aug 2002
Posts: 8,803
Likes: 0
From: Northern Virginia
I think you will be fine. Plenty of us have unhooked stuff mistakenly and thrown codes. It will clear itself. If the truck is running fine then don't worry about it.....
Reply
Old May 8, 2007 | 01:18 PM
  #3  
cincydiesel's Avatar
Thread Starter
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
Joined: Jan 2005
Posts: 2,187
Likes: 0
From: Ohio: Home of the disappointing sports teams
How long does it take to clear itself?
Reply
Old May 8, 2007 | 02:57 PM
  #4  
Dodgezilla's Avatar
Registered User
 
Joined: Aug 2002
Posts: 8,803
Likes: 0
From: Northern Virginia
Actually, you can just go to AutoZone and they can clear the codes for you for free I think. I was referring to the CEL clearing itself. I'm not sure how long the codes will remain in the computer's memory....
Reply
Old May 8, 2007 | 04:06 PM
  #5  
cincydiesel's Avatar
Thread Starter
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
Joined: Jan 2005
Posts: 2,187
Likes: 0
From: Ohio: Home of the disappointing sports teams
IF I do have to take it back to the dealer I will have to take everything off. However I cant take off the EGT probe. Will that alone viod my warranty?
Reply
Old May 11, 2007 | 12:19 AM
  #6  
cumminspower79's Avatar
Registered User
 
Joined: May 2006
Posts: 209
Likes: 0
From: Imperial, CA
Im not sure about the third gens but I think the second gens clear after about 50 starts or somthing like that. Its probebly the same way.
Reply
Old May 11, 2007 | 01:02 AM
  #7  
Juiced06's Avatar
Registered User
 
Joined: Sep 2006
Posts: 22
Likes: 0
From: Las Vegas
I believe Edge w/Att moniter clears codes for you just scroll down to clear and retrieve codes and follow instructions
Reply
Old May 11, 2007 | 02:57 AM
  #8  
madhat's Avatar
Administrator/Jarhead
15 Year Member
Liked
 
Joined: Jun 2006
Posts: 14,983
Likes: 25
From: Jonesborough, TN
That must be on the newer ones, cause mine does not do that...

I would not be worried about the codes. Let autozone clear them, then check the next day to see if any of them have came up. My vote is no, but better safe than sorry.
Reply
Old May 11, 2007 | 09:47 AM
  #9  
cincydiesel's Avatar
Thread Starter
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
 
Joined: Jan 2005
Posts: 2,187
Likes: 0
From: Ohio: Home of the disappointing sports teams
Yeah,
Mine doesn't have that either. However my friendlly mechanic cleared them for free and they yet to re-apear.
Reply
Old May 17, 2007 | 04:29 AM
  #10  
Juiced06's Avatar
Registered User
 
Joined: Sep 2006
Posts: 22
Likes: 0
From: Las Vegas
Yes this may be true seeing as you guys have an 05 and 04.5 mine is 06 and also came with turbo timer
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
abb
3rd Gen High Performance and Accessories (5.9L Only)
3
Jan 11, 2006 05:48 PM
ssleeper94
3rd Gen Engine and Drivetrain -> 2003-2007
5
Nov 11, 2005 11:47 PM
Flatty
24 Valve Engine and Drivetrain
2
Jun 13, 2005 01:59 PM
gatf4
3rd Gen High Performance and Accessories (5.9L Only)
7
Mar 22, 2005 02:00 PM
Sarge1124
HELP!
4
Sep 2, 2003 11:02 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:07 AM.