I just wrapped the install up and the truck ran great for about 5 min, went to drive her home and she's dead. The fuel pump is pumping fuel and its filling the fuel filter housing but the truck wont start, I checked the orientation of all the hoses, fitting and the pump and everything there is ok. The truck ran fine before I just wanted to add the system to make sure I didnt have any problems with the IP. This is on an 01 2500 ram cummins ho with an afe intake and muffler delete and thats it as far as performance goes. any help from you guys would be great! I need it!

Jordan

 

I'm bleeding the injectors right now, I'm getting some fuel so far... hopefully this'll do the trick.

 

still no luck. I disconnected the glacier diesel kit and re connected the stock fuel system, still trying to get it going, anybody have any ideas?

 

got it running and drove it home on the stock fuel system... I'd still be greatfull for any ideas as to why it wouldnt start with the kit.... I've heard nothing but good things about it.

 

well if it ran on the stock pump on the way home then you can look at the kit. probably something simple. The ip isn't really in the loop anymore.