HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

Blowing fuses

Old Mar 9, 2006 | 09:04 PM
  #1  
bluepuller's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 125
Likes: 0
From: Kalamazoo Michigan
Blowing fuses

I am blowing the fuse to my cigar lighter as fast as I can plug em in also the fuse to my auxillary outlet any ideas ?
Reply
Old Mar 9, 2006 | 09:06 PM
  #2  
Geico266's Avatar
Registered User
 
Joined: Mar 2004
Posts: 3,988
Likes: 7
From: Nebraska
You have a short. Don't put anymore fuses in until you find the short.

Have you looked inside them? Sometimes a coin or screw will fall in and dead short them.
Reply
Old Mar 9, 2006 | 09:26 PM
  #3  
bluepuller's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 125
Likes: 0
From: Kalamazoo Michigan
i havent looked in them or even thought about that possiblity i will though any other thoughts on where a short might develop in these ?
Reply
Old Mar 9, 2006 | 10:15 PM
  #4  
chop342's Avatar
Registered User
 
Joined: Jul 2005
Posts: 193
Likes: 0
From: Climax, MI (between battlecreek and kalamazoo)
stick a continuity tester between the load side of the fuse and ground and start moving and following wire harness until you find the short. i've chased a few shorts myself!
Reply
Old Mar 9, 2006 | 11:00 PM
  #5  
bluepuller's Avatar
Thread Starter
Registered User
 
Joined: Mar 2005
Posts: 125
Likes: 0
From: Kalamazoo Michigan
Thanks for the tips guess ill know what ill be doing tomarrow
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ds1rider
24 Valve Engine and Drivetrain
12
Dec 6, 2005 12:30 PM
Toomany Tools
HELP!
9
Jun 22, 2005 11:36 PM
JARHEAD
2nd Gen. Dodge Ram - No Drivetrain
1
Mar 9, 2005 01:44 PM
shortround
HELP!
6
Feb 4, 2005 09:38 AM
Dave65
2nd Gen. Dodge Ram - No Drivetrain
6
Jan 2, 2004 11:53 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:08 PM.