I just wanted to share this info.

Factory stock my truck pulled strongly to the right. After some adjustments to the Camber I have it driving very well.
I disconnected the sway bar to see if it would ride better, and it now pulls a little to the left.

So, if you have some pull in the steering wheel, FIRST drop one verticle link on the front sway bar to see if it affects it.
When I reconnect it , I will loosen the brackets at the frame to see if it pulls up evenly. Shim as necessary.

 

I had the same problem until I swapped tire on the front. Problem solved. Why? I have no idea, but it worked.

 

If the pull follows a tire when it is rotated, a tire has a broken belt.