Lubricity Additive Study Results
12-18-2016, 06:38 PM
#16
it gets posted so often it should be a sticky........ but I will add my usual comment. 2 stroke oil was tested, but not at the rate that many of us use it, they used half a quart in a tank( roughly) and most of us use a whole quart in a tank ( roughly) even at the half quart rate, 2 stroke oil did very well, I wish they would repeat the test at the one quart rate.
The following users liked this post:
motrapper (02-16-2017)
02-16-2017, 09:02 PM
#18
ATF in diesel fuel is a big no no....old timers used to do it many years ago but ATF composition has changed dramatically over the years....all kinds of additives that are designed not to burn and act as friction modifiers.
That stuff is hard on the newer style high pressure fuel systems and injectors......in my opinion makes as much sense as tossing a handful of fine sand into your fuel tank every time you fill up.
That stuff is hard on the newer style high pressure fuel systems and injectors......in my opinion makes as much sense as tossing a handful of fine sand into your fuel tank every time you fill up.
02-17-2017, 08:59 AM
#19
Point taken it was an old farmer that told me. Thanks for the info will have to see if any of the top four are available here in Utah. Then work my way down the list.
02-18-2017, 06:54 PM
#21
Registered User
Thread
Thread Starter
Forum
Replies
Last Post
Roany2002
3rd Gen Engine and Drivetrain -> 2007 and up
10
05-30-2008 10:40 AM