41 Plymouth with 12 valve
#1
Registered User
Thread Starter
Join Date: May 2009
Location: ALBANY NY
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
41 Plymouth with 12 valve
41' Plymouth 2 door sedan.
90' 12 valve with 100k on it
727 tranny getting a fresh rebuild
Frame is from a 76'd100. Used to be a Navy truck with 32k on it.
In the past 6 months I've done a lot with the car and finally got the motor and tranny mocked up. Also got the motor fired up and it helped with keeping me motivated with the project.
Still need a few things like front springs and a radiator. Hope to have it driving by spring and get to some shows and races.
90' 12 valve with 100k on it
727 tranny getting a fresh rebuild
Frame is from a 76'd100. Used to be a Navy truck with 32k on it.
In the past 6 months I've done a lot with the car and finally got the motor and tranny mocked up. Also got the motor fired up and it helped with keeping me motivated with the project.
Still need a few things like front springs and a radiator. Hope to have it driving by spring and get to some shows and races.
#4
I grad-u-ated frum Claudes skool of tpying....
to be honest I think it looks better with the steel wheels ..however ether way AWESOME job cant wait to see a video of it driving
Trending Topics
#8
Registered User
Thread Starter
Join Date: May 2009
Location: ALBANY NY
Posts: 66
Likes: 0
Received 0 Likes
on
0 Posts
The wheels have been bothering me about a week after I put them on.
I might have to trad for some flat black XD's. kinda took my friends word for it when he ordered them. They do look good in person but ...... I think I need different ones.
I still need to order a rebuild kit for the tranny. Was looking at the PATC kit.
Any thoughts on them .?
Thanks
I might have to trad for some flat black XD's. kinda took my friends word for it when he ordered them. They do look good in person but ...... I think I need different ones.
I still need to order a rebuild kit for the tranny. Was looking at the PATC kit.
Any thoughts on them .?
Thanks
#9
Registered User
That is a pretty sweet ride!!
I have a 48 Desoto I've bee considering doing something similar with. Do you have a complete build thread on any other board? Would love to see how you've done everything so far.
How similar was the wheel base between the Plymouth and the 2wd ram chassis?
I have a 48 Desoto I've bee considering doing something similar with. Do you have a complete build thread on any other board? Would love to see how you've done everything so far.
How similar was the wheel base between the Plymouth and the 2wd ram chassis?
Thread
Thread Starter
Forum
Replies
Last Post
mhuppertz
1st Gen. Ram - All Topics
19
10-05-2010 02:52 PM
Clane
3rd Generation Ram - Non Drivetrain - All Years
5
09-06-2009 09:18 PM