3rd Gen Pulls the SLED!
#1
Registered User
Thread Starter
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
#2
DTR Advertiser
I spoke to John ( floor it ) a few minutes yesterday and he tells me he qualified 13th in his 3rd gen at Indy. This was after a guy ran a redlight and T-boned them yesterday totalling the haul truck and trailer. The pulling truck nearly fell off the trailer but was saved by the guys truck at which it came to a rest on its top. John and family were fine, but shaken up pretty bad. The driver of the other truck was severly injured and may not have made it out of the mess alive. Lets hope so.
Anyway, when the puling truck was hit it shook it up pretty hard and somehow cut some wires to the pressure box. John did the 13th place with no pressure. Looks like he got that taken care of and now has the pressure working. Hopefully he will do better today with some more power to play with.
Don~
Anyway, when the puling truck was hit it shook it up pretty hard and somehow cut some wires to the pressure box. John did the 13th place with no pressure. Looks like he got that taken care of and now has the pressure working. Hopefully he will do better today with some more power to play with.
Don~
#3
Registered User
Thread Starter
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
The announcer at IRP said something about the accident happening and the truck falling off of the trailer, but not all the way.
His truck pulled pretty nicely, the track was alot tighter later in the day.
The first guys out were pulling in loose dust!
His truck pulled pretty nicely, the track was alot tighter later in the day.
The first guys out were pulling in loose dust!
#4
DTR Advertiser
I think Ray got 4th in qualifying yesterday. I dont know when or where he pulled in order. Something like 70 trucks were entered in the pulls. I will get a more complete report tonight when things settle down some.
Don~
Don~
#5
Registered User
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
Thats SWEET!!!!!!!!!
Where do you guys find the pulls? What safety stuff do I need to do pulls? It looks like fun since my 3 speed can't do 1/4 mile anyway.
So hoe did you do in the 300' with just the mods in your sig?
Where do you guys find the pulls? What safety stuff do I need to do pulls? It looks like fun since my 3 speed can't do 1/4 mile anyway.
So hoe did you do in the 300' with just the mods in your sig?
#7
Registered User
Join Date: May 2005
Location: Katy, TX off north Mason Road.
Posts: 2,088
Likes: 0
Received 0 Likes
on
0 Posts
I am somewhat Cummins dumb.LOL
So you have a 5" exhaust, tuner, FASS fuel, and cam? Thats it for power mods right? Do you know what kind of power your making?
So you have a 5" exhaust, tuner, FASS fuel, and cam? Thats it for power mods right? Do you know what kind of power your making?
Trending Topics
#8
Registered User
Thread Starter
Join Date: Jan 2002
Location: Southern, Indiana
Posts: 5,352
Likes: 0
Received 0 Likes
on
0 Posts
For electronics...
The TST POWERMAX!, Bully Dog Downloader, and TS Performance RAMIFIER!
I would say right now right at 500rwhp with the addition of the Bullydog.
The B104 is an aftermarket turbocharger.
The TST POWERMAX!, Bully Dog Downloader, and TS Performance RAMIFIER!
I would say right now right at 500rwhp with the addition of the Bullydog.
The B104 is an aftermarket turbocharger.
#12
Registered User
Join Date: Jun 2005
Location: Alabama
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
???
Can I ask whay gear you pulling in,mine in 4th and low is too,slow,but 5th and low seem to been more than it can pull will just hold it wherever I let the clutch lock at!!!!