Competition / Pulls / OffRoad You wanted it, well you got it. The competition and pulling forum. Please have your racing, pulling and other competition posts here. No East Coast vs. West Coast, and no flame wars!

Platte City Mo. pull

Thread Tools
 
Search this Thread
 
Old Jul 25, 2007 | 04:51 PM
  #91  
HOOKED's Avatar
Registered User
 
Joined: Sep 2006
Posts: 327
Likes: 0
Originally Posted by gwhammy
If you would take some time and really look at his hitch and see how it is made you would realize it is legal. So, what is your next complaint!
Gwhammy why are you arguing with me everything im saying is true?If it wasnt why does he get bumped from so many pulls? i dont have any complaints other that what i stated above which are both illegal for the class.If he would get legal and win every weekend what would there be to argue about?
Reply
Old Jul 25, 2007 | 05:09 PM
  #92  
Smoking S's Avatar
Registered User
 
Joined: May 2004
Posts: 99
Likes: 0
From: California,Mo
The pump part of Justin's injection pump is a P7100. If i remember correctly that's what years 94-98.5 came out with. What's not stock appearing about that? It's not painted black. What happens next when he changes to an automotive gov. and is still winning? The 5 years i've been pulling tractors before this truck, i've found out no one likes the winner.
Reply
Old Jul 25, 2007 | 05:10 PM
  #93  
bigyellowiron's Avatar
Registered User
 
Joined: Nov 2002
Posts: 22
Likes: 0
From: Excelsior Springs MO
Originally Posted by 1bad6.2
So you can chage rules as needed at pulls, is that cheating? They did it at Platte City. Your praising this pull at Platte City by going by the book and the rules, when in fact the rules they sent out earlier said nothing about not being able to have a Ag governor (RSV), until it was time to sign up..
If you would read all of the post before you throw your opinion out on the table you would have seen my previous post.

The governor had nothing to do with the Hart truck not being able to pull. Although that was our first clue.
The injection pump housing (that the outside portion that you can see), was not stock appearing.

If you have a p7100 laying around, which sounds like you must, look at the bottom of the housing. You'll see 6 holes with drive in plugs.

Now when you look at the "pump" on hearts truck you will see a screw on plate covering that the area on the housing.

Since you know so much about these pumps you'll know just from that what pump is on his truck, Ill give you a hint Its not a P7100!

I figured the person who would have been most upset over the rules would have been HOOKED since he had to install center caps on his rear wheels before he could pull. He done it without even complaining, he even had to use some caps off of a **** and make them fit. Now thats a stupid rule, but no one is complaining about it. I really gained some respect for him.

Some of these post on here really remind me of when I was in high school people talk about stuff they really have no idea what they are talking about.
I'm surprised this thread has not been killed yet. Getting to that point.
Reply
Old Jul 25, 2007 | 05:53 PM
  #94  
1bad6.2's Avatar
Registered User
 
Joined: Jul 2007
Posts: 7
Likes: 0
i am from st louis area, have seen truck from a distance at St. Peters. I'm Done
Reply
Old Jul 25, 2007 | 05:53 PM
  #95  
CatDoctor's Avatar
Registered User
 
Joined: Jul 2007
Posts: 33
Likes: 0
From: Peculiar MO
Just so everyone knows. Justins truck was not the only one we did not allow. Thier was a dmax that had a few things that were not in the rules, so we werent picking on Justin.
Reply
Old Jul 31, 2007 | 10:39 AM
  #96  
mtomac's Avatar
Registered User
 
Joined: May 2004
Posts: 88
Likes: 0
Here's video of the top 5 in the pulloff.

http://duramaxracing.com/2007PlatteC...selTopFive.mpg
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Gear Jammer
MODTR #30
6
Jul 26, 2010 03:10 PM
Tree DR
MODTR #30
1
Jul 20, 2009 06:46 PM
HOOKED
Competition / Pulls / OffRoad
13
Jul 26, 2007 11:23 AM
5.9Excursion
Competition / Pulls / OffRoad
3
Jul 13, 2007 12:34 AM




All times are GMT -5. The time now is 05:07 AM.