The folks at Sarver Automotive will be hosting a DIESEL DYNO DAY on SATURDAY MAY 16, the smoke starts rolling 8:30 AM ( rain or shine ), the dyno is a DYNO-JET 248C. This year the top prize will go to the entrant who rolls the 3 most consistent HORSE POWER numbers. This way no matter how much HORSE POWER you make everyone has a shot at the top prize. Rumor has it that the top prize maybe a LARGE TOOL BOX from NAPA. More on this as the event gets closer. There will be other give aways also. Food and drinks will be provided. If everyone doesn't get to dyno on SATURDAY the event will extend to SUNDAY MAY 17. Last Fall this event drew a really nice crowd I think somewhere around 30 trucks spun the rollers. Stacked trucks will have to drop the pipe under the truck and duallies will have to remove the o/s wheels. The cost will be $60 dollars for 3 pulls. Any questions can be directed to Brandon 724-353-1000. Sarver is located about 20 miles North of PITTSBURGH. Not real far from W.VA., OHIO or MARYLAND. Hope to see a lot of you guys there. More details to come. Thanks Steve B.

 

I missed the one last fall...

I'm gonna mark this one down and try to make it for sure.

 

That's some impressive number's you have with your 99...

Worth the price of admission to see that thing run alone, sir.

 

Hope you can make it down. There's also a Diesel Drag Race @ Pittsburgh on April 25. Thanks Steve B.

 

To The Top...

 

The prize for the THREE MOST CONSISTENT PULLS will be a NAPA 41" TOOL CHEST ( retail value $900 - $1000 ). So it doesn't matter HOW MUCH HORSE POWER YOU MAKE EVERYBODY HAS A CHANCE TO WIN !! There has been ONE change on the price the guys at SARVER AUTOMOTIVE would like to have an idea of attendance so the cost will be $60 PRE REGISTERED by FRIDAY MAY 15, otherwise cost will be $70 day of event SATURDAY MAY 16. To register call 724-353-1000. SARVER AUTOMOTIVE, 315 SARVER RD, SARVER, PA. Hope to see you there. Thanks Steve B.

 

Sounds like a pretty good deal to me...

Hope to see some of you there to help me load up my new tool chest.

 

I might try to make this, but I will be at Diesel Dawgs for sure. Elkins Motor speedway pulls are May 2. I will be at Smithton hole May 8.

 

Coming up this Saturday who's going ?? Thanks Steve B.

 

Unfortunately,

I'm stuck in the middle of moving and will not be able to attend.

 

Sarver is located about 20 miles North of PITTSBURGH. Thanks Steve B.[/QUOTE]



If you are going up 28 north - it takes about an hour out of Pittsburgh to get to the exit for RTE 356 to Sarver, closer to 50-60 miles. Of course there are other ways to get to Sarver, but all take about an hour.


CD

 

If you are going up 28 north - it takes about an hour out of Pittsburgh to get to the exit for RTE 356 to Sarver, closer to 50-60 miles. Of course there are other ways to get to Sarver, but all take about an hour.


CD[/QUOTE]
Yes 28 N to 356 North to 228 East ( Sarver Rd. ) You should be able to get from Pittsburgh to Sarver in about 40 min. See you tomorrow. Rain or Shine. Thanks Steve B.

 

hope there's a nice DTR showing, i'll be there

 

Jason it was good seeing again and meeting your Dad, you left before I got a chance to tell you. Hope to see you next time. Thanks Steve B.

 

CD[/QUOTE]
Yes 28 N to 356 North to 228 East ( Sarver Rd. ) You should be able to get from Pittsburgh to Sarver in about 40 min. See you tomorrow. Rain or Shine. Thanks Steve B.[/QUOTE]



Hey Steve.

I just commented about the time/mileage from Pittsburgh to Sarver. Actually, I do not know where the dyno shop is, but I lived in the Sarver area several years ago and knew it was not a 20 mile trip, so I commented about it.

I am located/live in New Mexico. We had a dyno day here in Albuquerque today too.

I hope you all in PA had as much fun as all of us did in New Mexico.

CD