Air shut off install
#1
Registered User
Thread Starter
Join Date: Nov 2002
Location: Arcadia, WI
Posts: 457
Likes: 0
Received 0 Likes
on
0 Posts
Air shut off install
I'm going to put a pre-turbo air shut off gate and am wondering how best to do the cable.
I have a 1/4" flexible copper line run from the rear to behind the turbo and will use an 1/8" cable with split rings on each end.
My question is how much slack to leave in the cable. It is a sliding gate type shut off activated when the pin is pulled. Also should I run a cable to the cab?
Any help appreciated. I know many places have different rules but I'd like to find a reasonable starting point.
Paul
I have a 1/4" flexible copper line run from the rear to behind the turbo and will use an 1/8" cable with split rings on each end.
My question is how much slack to leave in the cable. It is a sliding gate type shut off activated when the pin is pulled. Also should I run a cable to the cab?
Any help appreciated. I know many places have different rules but I'd like to find a reasonable starting point.
Paul
Thread
Thread Starter
Forum
Replies
Last Post