Mark this thread as Unsold
DANA 60 70 set up bearings
12-15-2014, 03:03 PM
#1
Registered User
Thread Starter
Join Date: Nov 2014
Location: Florida
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
DANA 60 70 set up bearings
I have a brand new set of bearings for setting up your carrier in a DANA 70U.(Not sure if they fit a D70HD). I purchased these so I could hone them out and set up my diff. I also have the used pinion outer bearing that I will throw in. it will slide onto a new pinion without having to use a bfh and block of wood to get your pinion out when setting up preload.
These are Timken brand if it matters.
$50 shipped to lower 48 or Canada eh.
http://www.summitracing.com/search?S...yword=rat-9008
These are Timken brand if it matters.
$50 shipped to lower 48 or Canada eh.
http://www.summitracing.com/search?S...yword=rat-9008
Thread
Thread Starter
Forum
Replies
Last Post
Mutt68
3rd Gen Engine and Drivetrain -> 2003-2007
2
09-25-2012 12:51 PM
Buffalo
Towing and Hauling / RV
11
01-22-2006 12:50 AM
kurtwalton
2nd Gen. Dodge Ram - No Drivetrain
3
05-05-2005 12:22 AM
Bill Tomlinson
1st Gen. Ram - All Topics
4
05-27-2004 06:50 AM
