Big Cummins
 

So I jumped up on this QSK50 today and I actually said holy crap out loud. hands down without doubt the biggest turbos I have in person seen on a diesel burning engine. AND each bank is compounded. God bless Cummins.............doing compound quads as an OEM.


dual holsets. HT100's feeding HX93's


http://i144.photobucket.com/albums/r...44/QSK5001.jpg
http://i144.photobucket.com/albums/r...44/QSK5002.jpg
http://i144.photobucket.com/albums/r...44/QSK5003.jpg
http://i144.photobucket.com/albums/r...44/QSK5005.jpg
http://i144.photobucket.com/albums/r...44/QSK5004.jpg

Now that's a BIG Cummins, but I think we could still sqeeze it under the hood.

Dang!! you would have to look like one of those strong men on ESPN to pick up that snail.. sweet cummins though.

wow 2000hp and 5805tq with a reduction of NOx by 40% and particulate matter by 60%

http://www.everytime.cummins.com/assets/pdf/4087142.pdf

Whats it for a frac unit or power generation?


Tim

these are frac engines. QSKTA50-CE 2300hp rated (1697.2Kw measured) S9820M series Allison. it measured 45psi boost at rated speed and load (312.8 kPa)

we setup 5 engines and trannys for BJ services.

what is a frac engine? sorry for my ignorance.[duhhh]

Its oilfield equipment. specifically wellhead service equipment. The unit is a Fracture pump. engine drives the transmission, tranny driveshaft to pump. really simple just really big. for being mobile. the key is getting the most horsepower they can get on 1 trailer.

basically oil and gas is trapped in rock formations underground right. to be the well flowing faster. a fluid substance, usually corrosive. is pumped downhole and literally fractures the rock formations freeing up more oil or gas. they hook these rigs up in parallel. for really big deep wells.

Are you taking about BJ in Eldorado?

BJ is across all of north america and international. they have a huge facility in Calgary, well some of its shutdown now in this slowdown.

Had no idea they were such a large company.

Oh yes, BJ is huge.

was running one up today. heres a frac unit. this is a GSK50 cummins as well, but a twindisk transmission not an allison 9000 series. at fullboat they can do about 15,000psi on a 5" bore discharge -ish


http://i144.photobucket.com/albums/r...90622-1604.jpg
http://i144.photobucket.com/albums/r...90622-1604.jpg

Thats one of our new style pumpers, Who do you work for?

Waterous Calgary.