Transmission shop in Calgary
#1
Sausage Aficionado (In training)
Thread Starter
Transmission shop in Calgary
Good morning Alberta DTR folks,
My truck got really sick yesterday. There is a horrible gridning sound when I am sitting still in park or neutral, if I accelerate or keep a load on the drivetrain the sound seems to go away. As soon as I take the load off the transmission to coast to a stop the grinding comes back. When sitting still it is AWFUL. It doesn't sound like it is in the engine, it sounds more like it is coming from the bell housing BUT don't take that as gospel, just where I think I hear it. I assume it has something to do with the input shaft or torque converter. Do any of you recommend any good tranny shops? I haven't boosted the power and I don't tow much and when I do I don't tow heavy.
My truck got really sick yesterday. There is a horrible gridning sound when I am sitting still in park or neutral, if I accelerate or keep a load on the drivetrain the sound seems to go away. As soon as I take the load off the transmission to coast to a stop the grinding comes back. When sitting still it is AWFUL. It doesn't sound like it is in the engine, it sounds more like it is coming from the bell housing BUT don't take that as gospel, just where I think I hear it. I assume it has something to do with the input shaft or torque converter. Do any of you recommend any good tranny shops? I haven't boosted the power and I don't tow much and when I do I don't tow heavy.
#2
Could be the flex plate they had a lot of those come apart as well....sorry I can't help you on a shop in your area but I will wish you the best of luck hoping it is NOT a expensive repair
#3
Sausage Aficionado (In training)
Thread Starter
I know the ABDTR chapter has been quiet lately but in case anyone checks in, I called Windemon today and his crew referred me to a shop in the Balzac area. My truck was towed there this morning.
#4
Registered User
Was going to suggest Accurate Transmission at Crowfoot. This is going back a few years but I know of several people they treated well.
Hope it goes well for ya wherever you end up.
Hope it goes well for ya wherever you end up.
#5
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
My 02 47/48re transmission was built up by Steve as well. Steve does top end work and he will get you rolling soon. He does a mean 47/48re build, I got mine with as many clutches as I could for each drum. New TCS billet shafts and TCS converter. I'm just piecing my truck back together, I have been working way to much out of town, with my 2010. I prefer to use my older truck for the mucky stuff, its just cheaper to drive and break stuff.
#6
Registered User
hey Sean, commercial driveline in Balzac is excellent, them or transmission express in camrose are both excellent shops , and stand up guys to deal with.
Thread
Thread Starter
Forum
Replies
Last Post