Rear sliding window switch
#1
Rear sliding window switch
Hey, I just can't seem to find what I need...I'm trying to hardwire my dash cam . I'm going to steal power from the power sliding rear window. Finding keyed 12v is no problem. I can't find anything to verify a ground wire and darned if I can find a schematic. Does anyone know for sure if the black w/dark green stripe wire on the rear sliding window switch is an actual ground and not some goofy BUS wire? That's my concern is that I'll end up back feeding power and that would be bad. And yes I could just run the wire down and around and etc...but I would like to do it this way if possible.
2011 RAM 2500 Laramie Mega Cummins.
Thanks for helping.
2011 RAM 2500 Laramie Mega Cummins.
Thanks for helping.
Thread
Thread Starter
Forum
Replies
Last Post
Mark Hodowanec
3rd Generation Ram - Non Drivetrain - All Years
8
08-14-2004 11:27 AM
jarmar
3rd Generation Ram - Non Drivetrain - All Years
39
01-13-2004 11:52 AM
PADZZ
3rd Generation Ram - Non Drivetrain - All Years
5
03-07-2003 10:43 AM