04ctd

go here & put in your VIN: Safety Recall Information | MOPAR

leads you down the rabbit hole to download the software a USB stick (the most often used tool in my toolbox lately) and a PDF walks you thru loading it via the trucks' menus


Update 1: UCONNECT® 8.4A_RA3_15_17_5_MY15
View Details
Service Bulletin ID: 8-31-15 & 8-35-15Release Date: 2015-07-15Instructions:

Once you have downloaded this software update, click here for instructions on how to apply the update to your vehicle.
In This Version:

Should you encounter any issues with your update, please contact the Uconnect customer care center at 1-877-855-8400, and press # to reach a customer support technical specialist. Canadian residents , call 1-800-465-2001 (English) or 1-800-387-9983 (French). Residents outside the US and Canada please see your dealer.

This update contains the following improvements and or additions:

-Enhanced performance in Navigation, AM/FM Sound Quality and Voice Recognition
DOWNLOAD
If you are unable to download this update by using the Akamai NetSession Interface, please click here to download the update directly in your browser.
Once the file is done downloading, double click the 7z file to extract. For further instructions, refer back to the "Downloading the update" section.



Uconnect® Software Update - Update your Uconnect® System


Update available
Your 2015 RAM 2500 SLT 4X4 equipped with the Uconnect system qualifies for the following software update:
Update 1: UCONNECT® 8.4A_RA3_15_17_5_MY15
Service Bulletin ID: 8-31-15 & 8-35-15Release Date: 2015-07-15



SEARCH RESULTS
VIN: 3xx
Year: 2015
Vehicle: RAM 2500 SLT 4X4
Questions
Please contact the Chrysler Group RecallAssistance Center at 1-800-853-1403
Results Last Updated: February 12, 2016

R40
15V-461 July 23, 2015

SOME 2013-2015 MY VEHICLES EQUIPPED WITH SPECIFIC RADIOS HAVE CERTAIN SOFTWARE SECURITY VULNERABILITIES WHICH COULD ALLOW UNAUTHORIZED THIRD-PARTY ACCESS TO SOME NETWORKED VEHICLE CONTROL SYSTEMS. A SUCCESSFUL EXPLOIT OF THIS SECURITY VULNERABILITY COULD RESULT IN UNAUTHORIZED REMOTE MODIFICATION AND CONTROL OF VEHICLE SYSTEMS. FCA US HAS NOT MADE A DETERMINATION THAT THIS SECURITY VULNERABILITY CONSTITUTES A DEFECT. ALTHOUGH FCA US HAS NOT DETERMINED THAT A DEFECT EXISTS, IT HAS DECIDED TO CONDUCT A REMEDIAL CAMPAIGN AS A SAFETY RECALL IN THE INTEREST OF PROTECTING ITS CUSTOMERS. EXPLOITATION OF THE SOFTWARE SECURITY VULNERABILITIES COULD LEAD TO EXPOSING THE DRIVER, THE VEHICLE OCCUPANTS OR ANY OTHER INDIVIDUAL OR VEHICLE WITH PROXIMITY TO THE AFFECTED VEHICLE TO A POTENTIAL RISK OF INJURY.

CUSTOMERS AFFECTED BY THE RECALL WILL RECEIVE A USB DRIVE WHICH THEY MAY USE TO UPGRADE VEHICLE SOFTWARE, PROVIDING ADDITIONAL SECURITY FEATURES INDEPENDENT OF THE NETWORK-LEVEL MEASURES. ALTERNATELY, CUSTOMERS MAY VISIT
HTTP://WWW.DRIVEUCONNECT.COM/SOFTWARE-UPDATE/
TO INPUT THEIR VEHICLE IDENTIFICATION NUMBERS (VINS) AND DETERMINE IF THEIR VEHICLES ARE INCLUDED IN THE RECALL. IF SO, THEY MAY DOWNLOAD THE SOFTWARE THEMSELVES, OR VISIT THEIR DEALERS, WHERE TECHNICIANS WILL PERFORM THE INSTALLATION. THERE IS NO CHARGE FOR THE SOFTWARE OR, IN THE CASE OF DEALER VISIT, INSTALLATION. INCOMPLETE BUT REPAIR PARTS ARE AVAILABLE SUBMIT REIMBURSEMENT

Viewing 1 of 1 total recalls
Campaigns (What is a Campaign? Learn More)
There are no outstanding campaigns for the above listed VIN
Disclamer
Notification letters issued prior to 1999 are not available online. Please contact us by email to request a c

PDF of directions:
https://rsur.download.chrysler.com/1...75d0842ca4ac4a

04ctd

just put the file on the USB (& put other files into folders on your USB - it says to empty the USB, I did not)

stick it in the USB slot & wait a bit, it will run automatically, (none of the directions matched what my radio displayed)

THEN there is a sequence at the end (reboot it twice), print out that single page if you want.

it's a no brainer.