Question on late model 4x4's
#1
Registered User
Thread Starter
Question on late model 4x4's
Yesterday I test drove a new 2500 Laramie 4x4. Oh it was nice (and expensive).
Question I have did Ram change the front axle design whereas the front drivetrain is no longer turning while disengaged? The lot lizard mentioned it but I want to verify.
Question I have did Ram change the front axle design whereas the front drivetrain is no longer turning while disengaged? The lot lizard mentioned it but I want to verify.
#2
Registered User
Join Date: Dec 2010
Location: Missouri
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Took a quick look at my 2015 with the Aisin as the wife pulled into the driveway the other day. The front drive shaft was not turning.
#3
Registered User
Thread Starter
Thanks.
I did research and the newer trucks have CAD (Central Axle Disconnect). Not quite as good as free spinning hubs but better than the previous setup with everything turning up to the transfer case.
I did research and the newer trucks have CAD (Central Axle Disconnect). Not quite as good as free spinning hubs but better than the previous setup with everything turning up to the transfer case.
Thread
Thread Starter
Forum
Replies
Last Post
swimmy
Performance and Accessories 2nd gen only
6
04-26-2005 12:42 AM
Patrick Campbell
3rd Generation Ram - Non Drivetrain - All Years
2
10-19-2003 09:22 AM
Performance and Accessories 2nd gen only
2
12-02-2002 02:42 AM