mini mounted.
 

I had planed on making a bracket but the hole come out so nice I don't need one. I can move it all around, tip it up/down what ever and it stays there, Does not even move when I hit some big bumps!!

There are 5 hex head bolts and two philps heads holedingh the console down then ya need to un plug the wire to the 12v plug and it can right off.

Thanks for trying to help Chris.

stupid dodge system only shows 2 screws. grrrrrrr

looks good though brother!

looks good, that's where mines going too! (as soon as i can talk the wife into it)

So where does the other end of that hdmi cable go to? Is that the only cable that's needed for power and programming? Looks very clean and nice.

Clean install but for me I would hate to have to look down all the time to read the data. Mine is currently windshield mounted till I get the overhead mount. I like the location of the windshield mount but not the look.

Under the dash, it plugs into a box that all the wires run to and that plugs into the factory plug above your feet.

I agree but there was no way to mount high like my last setup that did not look cheap IMO. The thing is with all the defule pre sets you really don't need to look at it that much to be safe and it is realy easy to see anyway. My last truck 04 i had to watch the gages all the time for a wile till I finaly got it set up so i could not hurt it no matter what I did. (after I blow up the stock turbo LOL) That truck was SICK!!! Towing heavy hard up big hills it still ran very nice EGT's.

So does the mini come with everything needed to complete that install with the hdmi cable?

Yes. No info I came up with the idea and just tried it.