I'm in a bind, so I hope someone can help me. H&S is closed today.

Turbo-back exhaust is on and ready to take the family to in-laws for Christmas, but can't get the Mini Maxx to even recognize the software. I get a MMd010.bin, Error code 0.

Read some threads on other forums about doing manual update, but the first instruction on the H&S website is "Downloads>Mini Maxx Downloads", which is a link itself, but doesn't get me to where it describes. Almost looks like this is also to update the Mini Maxx and I can't get to the "Menu" to tell if this is where I need to start, but have tried the card update with my vehicle at least six times.

Any suggestions are greatly welcomed. I'll try nearly anything today as I NEED the truck tomorrow.

 

I was just on the update site and the latest update is 6.8.39 which is to fix a download problem, probably what you are experiencing. There is the option to manually do the update here's a link. http://www.hsperformance.com/mini-maxx-downloads/ You will notice a spot that says "click here for latest update" I would suggest returning the truck to stock, do the latest update 6.8.39 to the card then load it into the tuner then update the truck. Card, tuner then truck. Normally you don't return to stock before updating but in this case it might pay to do that. Good luck

 

Thanks again, Busboy.

Got it done by reformatting the micro SD card and using the auto update.