hehehehe
#1
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
hehehehe
ok, so the itch to delete is getting the best of me and going to pull the trigger.
have the H&S EGR/cooler delete kit at the shop.
going to order 5" Turbo back stainless Flow Pro with muffler tonight
smarty JR is on the way
going for mileage tests right now and heading to Idaho in August (first montana to see RiflemanUSMC and his family then down to Idaho) for my 20th class reunion and pick up my son who has been spending the summer up there with my parents and brother/his wife and kids. will be pulling a small motorcycle trailer with the harley and my new matco 6s toolbox (picking up in montana ) so that will be a nice long run for mileage tests and having 130 gallon capability will be nice
when the smarty SR is released, i will be stepping up the program a bit.
GDP pro gate will be installed (it will be installed one way or another. KILLER product!)
WCC intake horn with TV delete and internal grid heater
GDP intake plate
Going to make my own spool aide
S&B cai when it comes out
fass hd150
water meth (just cause)
have the H&S EGR/cooler delete kit at the shop.
going to order 5" Turbo back stainless Flow Pro with muffler tonight
smarty JR is on the way
going for mileage tests right now and heading to Idaho in August (first montana to see RiflemanUSMC and his family then down to Idaho) for my 20th class reunion and pick up my son who has been spending the summer up there with my parents and brother/his wife and kids. will be pulling a small motorcycle trailer with the harley and my new matco 6s toolbox (picking up in montana ) so that will be a nice long run for mileage tests and having 130 gallon capability will be nice
when the smarty SR is released, i will be stepping up the program a bit.
GDP pro gate will be installed (it will be installed one way or another. KILLER product!)
WCC intake horn with TV delete and internal grid heater
GDP intake plate
Going to make my own spool aide
S&B cai when it comes out
fass hd150
water meth (just cause)
#2
Administrator/Jarhead
Sounds like a winner, buddy. I've been looking at doing a spool aid, but I really want to bite the bullet and mill the head and fab an intake...
#3
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
spool aide is sweet. did one on a 05 for a buddy here in town. the #6 cyl was a (@*E&$(@#&*$)(#*& to get in but after a b f hammer it went in lol.
#5
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
no, its that #6 is tucked in there and removal of the fender well is required but fender is still in the way from getting a 100% straight on shot at hammering that piece into #6.
#6
Hey Chris how many miles do you have now? Is that WCC intake the same one i had on my 08? If so it was a NICE product. Jaxon does good work. I am interested to see how you like the water meth. I am on the fence about it.
#7
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
wild card customs
have 5700 ish miles on it now. went on a pretty good trip yesterday.
abq to vaughn, to capitan to san antonio (nm) and back to albuquerque.
got home about 11ish
have 5700 ish miles on it now. went on a pretty good trip yesterday.
abq to vaughn, to capitan to san antonio (nm) and back to albuquerque.
got home about 11ish
Trending Topics
#13
Administrator / Severe Concussion Aficionado
Man oh man I cant wait.
I told myself I was gonna wait for the factory match Isspro gauges...
Not gonna make it. Ordering gauges and exhaust in a couple of days.
I told myself I was gonna wait for the factory match Isspro gauges...
Not gonna make it. Ordering gauges and exhaust in a couple of days.