Dodge Diesel - Diesel Truck Resource Forums - Flat bed tail light problems.

Dodge Diesel - Diesel Truck Resource Forums (https://www.dieseltruckresource.com/forums/)

- 4th Gen High Performance and Accessories 2010 and Up (https://www.dieseltruckresource.com/forums/4th-gen-high-performance-accessories-2010-up-200/)

- - Flat bed tail light problems. (https://www.dieseltruckresource.com/forums/4th-gen-high-performance-accessories-2010-up-200/flat-bed-tail-light-problems-330574/)

YZ3500F

07-13-2018 02:55 PM

Flat bed tail light problems.

Im building a flat bed on my truck and I have gotten to the point of installing taillights. The drivers side went in without a hitch the passager side not so much. I have brake and blinker but no running lights. I have checked back about 4 feet into the loom for continuity and that checks out. Seems that I'm just missing power though I don't know where to back track to find it. I wouldn't think this one line would be on a separate fuse but maybe. Any help would be greatly appreciated. 2015 ram 2500 slt btw

nvr-enuf

08-02-2018 12:49 PM

If you are running LEDs, if not already done so, you need to add a resistor.

For my flat bed, I tied into the factory harness in the rear of the truck. If you are doing the same, replug in your factory tail light housings to confirm you still have tail lights

YZ3500F

08-03-2018 09:07 AM

Thanks for responding. I was able to get all the lights working after some trial and error.
https://cimg1.ibsrv.net/gimg/www.die...25bbc4cd6f.jpgTesting the blinker

All times are GMT -5. The time now is 07:43 PM.