Flat bed tail light problems.
07-13-2018, 02:55 PM
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: MN
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Flat bed tail light problems.
Im building a flat bed on my truck and I have gotten to the point of installing taillights. The drivers side went in without a hitch the passager side not so much. I have brake and blinker but no running lights. I have checked back about 4 feet into the loom for continuity and that checks out. Seems that I'm just missing power though I don't know where to back track to find it. I wouldn't think this one line would be on a separate fuse but maybe. Any help would be greatly appreciated. 2015 ram 2500 slt btw
08-02-2018, 12:49 PM
#2
Registered User
If you are running LEDs, if not already done so, you need to add a resistor.
For my flat bed, I tied into the factory harness in the rear of the truck. If you are doing the same, replug in your factory tail light housings to confirm you still have tail lights
For my flat bed, I tied into the factory harness in the rear of the truck. If you are doing the same, replug in your factory tail light housings to confirm you still have tail lights
Thread
Thread Starter
Forum
Replies
Last Post
Mark Hodowanec
3rd Gen High Performance and Accessories (5.9L Only)
3
07-16-2006 04:05 PM
Mark Hodowanec
3rd Gen High Performance and Accessories (5.9L Only)
10
02-24-2006 04:22 PM