Dodge Diesel - Diesel Truck Resource Forums

Dodge Diesel - Diesel Truck Resource Forums (https://www.dieseltruckresource.com/forums/)
-   4th Gen High Performance and Accessories 2010 and Up (https://www.dieseltruckresource.com/forums/4th-gen-high-performance-accessories-2010-up-200/)
-   -   Castor setting (https://www.dieseltruckresource.com/forums/4th-gen-high-performance-accessories-2010-up-200/castor-setting-302392/)

chopper698 04-15-2012 09:36 AM
Castor setting
 
Anyone no where 4 degrees would be in relation to
the cambolt with the hole in it on the caster setting?

stroker101 08-26-2017 07:05 AM
based on my son's 2017 3500 Dually 4x4, arrow on cam bolt would be at the farthest mark towards the axle/front of truck.
that's what we found yesterday when we adjusted the caster,...

johnh 08-27-2017 09:16 AM
Originally Posted by chopper698 (Post 3097665)
Anyone no where 4 degrees would be in relation to
the cambolt with the hole in it on the caster setting?
take it to a front end alignment shop unless your'e in training for alignment for four wheel drive vehicles!

stroker101 08-27-2017 04:08 PM
"caster" can be set at home in your level driveway, with the use of basic hand tools and a angle finder. no need to take it in to a shop

ecmexchange 09-07-2017 06:48 PM
From personal experience, I tend to agree with stroker101. Give or take a half degree. :)


All times are GMT -5. The time now is 10:41 AM.


© 2024 MH Sub I, LLC dba Internet Brands