1 inch block with Carli Add A Pack
#1
Registered User
Thread Starter
Join Date: Apr 2005
Location: Norfolk
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
1 inch block with Carli Add A Pack
I am currently considering adding a 1 inch block to my 2014 SRW 3500 4x4 Crew Cab short bed. The truck currently has a Bilstein 2.3 inch leveling kit with a Carli torsion Sway Bar and Carli adjustable track bar. I then replaced my rear overload springs with the Carli Add a pack in order to bring the back up a little bit and get a little better ride quality out of the truck. This only raised the back of the track by 3/4 to 1 inch. I am beginning to tow and put more weight in the back and am thinking of doing the 1 inch block in the back. I'm not really looking at putting air bags in because I don't want to constantly adjust them or effect my current ride quality. I believe this additional inch will also help my hitch. I have a Gen Y 9 inch drop hitch and worry about it being too low if I put a heavy trailer on the lowest setting. Will this raise the back of the truck too much? What is everyone's take on this set up?
Thanks in advance,
ama481
Please ignore truck in the signature...old truck
Thanks in advance,
ama481
Please ignore truck in the signature...old truck
Thread
Thread Starter
Forum
Replies
Last Post
tauberson
3rd Gen High Performance and Accessories (5.9L Only)
5
05-02-2008 08:59 AM
silkywoods
3rd Gen High Performance and Accessories (5.9L Only)
9
12-08-2007 04:23 PM
coontz0473
3rd Gen High Performance and Accessories (5.9L Only)
7
11-07-2007 06:31 PM
Lsufan78
3rd Gen High Performance and Accessories (5.9L Only)
28
08-26-2007 07:03 PM
Joe T
3rd Gen High Performance and Accessories (5.9L Only)
16
06-12-2007 12:11 AM