Steved350

So I took the cover off my air filter to clean it up. I reconnected the two sensors and now have error code p1193 and p2228 that was read by Autozone. I came home and did the key trick to see what the codes were and it didn't show anything. How many heat cycles does the engine have to go thru before that light goes away? Is there a way to reset the light?

Wilber1

My 2011 doesn't show codes with the key trick like my 01. You can reset the light if you have an OBD2 code reader. Not expensive if you can find one on sale and well worth the money.

6.7L MegaCab

You just need to clear those codes.