Turn Signal stalk replacement. Again!!!!!
#1
Turn Signal stalk replacement. Again!!!!!
07 5.9L w 240k...
My turn signal stalk is going out again this will be the 4th replacement.
Factory was replaced with factory unit.. When that one failed I tried an aftermarket through NAPA autoparts. now this one is going out. (Signal one way and the indicators light up the opposite way or just go crazy)
Seriously, dont know how they managed to get this part so wrong. Its not like signals are a new thing on automobiles!!!!
Anyhow... Does anyone have a recommendation for and aftermarket supplier that will actually last?
My turn signal stalk is going out again this will be the 4th replacement.
Factory was replaced with factory unit.. When that one failed I tried an aftermarket through NAPA autoparts. now this one is going out. (Signal one way and the indicators light up the opposite way or just go crazy)
Seriously, dont know how they managed to get this part so wrong. Its not like signals are a new thing on automobiles!!!!
Anyhow... Does anyone have a recommendation for and aftermarket supplier that will actually last?
#2
Registered User
Best I can come up with is to go back to the mopar unit. Its what happens when they try and put everything in one place. I know a lot of the first gen Auroras had some serious problems with theirs, mine would sit all alone and flash the park lights like it was possessed. The only fix was a $300 multi-function switch...
Thread
Thread Starter
Forum
Replies
Last Post
xp8103
4th Gen Ram -Non Drivetrain- 2010 and Up
0
04-06-2015 05:33 PM
crossy
1st Gen. Ram - All Topics
1
05-13-2013 10:11 PM