Speaker Size
I just put 6.5" components up front and 6.5" coaxials in the back. Just needed to make new holes for the rear.
I put the tweeters in the 3 1/2" speaker location in the dash next to the ac vent. I just made an adapter peice out of 1/4" poplar and it dropped right in.
I put the tweeters in the 3 1/2" speaker location in the dash next to the ac vent. I just made an adapter peice out of 1/4" poplar and it dropped right in.
I just put 6.5" components up front and 6.5" coaxials in the back. Just needed to make new holes for the rear.
I put the tweeters in the 3 1/2" speaker location in the dash next to the ac vent. I just made an adapter peice out of 1/4" poplar and it dropped right in.
I put the tweeters in the 3 1/2" speaker location in the dash next to the ac vent. I just made an adapter peice out of 1/4" poplar and it dropped right in.
I went with some Polk db series... db6501 in the front, db651s in the rear. I'll be putting a Kicker CVR10 in between the front seats, and powering it all with a Kicker ZX700.5, 70Wx4 ch, and 420x1 ch for the sub.
Still a good chunk of change though.
I put Pioneer 6x9s up front, 6.5s out back, MUCH better than the factory junkers...
I ALMOST dont need a headunit, except for the fact that the factory radio wont play CDs anymore(without skipping or ejecting)
I ALMOST dont need a headunit, except for the fact that the factory radio wont play CDs anymore(without skipping or ejecting)
Thread
Thread Starter
Forum
Replies
Last Post
scoutman
3rd Generation Ram - Non Drivetrain - All Years
1
Aug 16, 2006 09:35 PM
Patrick Campbell
Performance and Accessories 2nd gen only
7
Dec 16, 2004 01:53 PM



