Well i posted a while ago looking for a drw to srw swap and with no good results changed the look of the rig to where i think i love it but im still missing the pizzazz im looking for. Maybe black 6in stacks? Turn outs for that matter? Let me know

BEFOR


After


its amazing at whatremoving embelms, sumilaters, and step bars will do

 

Heres the rear, when i first got the truck some idiot for got to latch the trailer down and put it into the tailgate, i would point fingers but turns out i was the only one there



pulled the dent and had it line-x because i got to thinking and every time i step on the bumper foot hit the tailgate so paint seemed pointless

 

I like the idea of black stacks instead of the chrome, as it seems more like the look you are going for.
I definitely like the idea idea of the Line-X as well. Ever considered doing the sides of the truck with it in a 2-tone? I did it with my old Blazer in the same color red and loved the look.

I can dig up a pic, but it wouldn't be near the look of your truck with it done.

 

Next I would do niterunner headlights, black out the fogs, black stacks and black door spears to match the mirrors and handles. Or keep it the way it is. Looks good.

 

Single 8 inch black stack slightly off center to the passenger side.

 

Maybe add a big black front end replacement bumper. (aka a deer strainer )

..

 

Looking into stacks, but untill then anyone have pictures for red trucks with black headlights?

 

Nice.

 

Hey, I tried.

 

well another update, i did dual 7in black, not sure if i like them, the sound is way different and with having the stacks off during the change idk i think i like with out... Let me know....

post abouve is with 5'

pic below is with out



7 inchers homemade

 

With the 7", it looks awesome. Id leave it like that!

 

I like the stacks and the Cummins sticker!!!

Great job...

--Eric

 

I like the black 7" mitre's much better than the chrome 5" mitre's you had previously. Dual black 7" mitre's just fit the truck better. Large and in charge.

 

Oh yes i like te stacks much better then what i had on it, the 5in were too small. But my thing is it the 7in have a lower tone, so to me its louder in the sense it like going from a tweeter to a woofer and gets on the nervs at about 2k rpms.

I will need a muffler but i want to tone it down some. from 1-10 10 being lound, i want a 8.

I want to be able to get on it and turn heads still, but cruist and be able to think.

I have to strighten them out and weld some brackets on them that go to the top of the bed rail to hold em in

thanks for the comps

 

Throw a 51" Donaldson on it. That takes away the drone and leaves a nice deep tone.