Dodge Diesel - Diesel Truck Resource Forums

Dodge Diesel - Diesel Truck Resource Forums (https://www.dieseltruckresource.com/forums/)
-   3rd Generation Ram - Non Drivetrain - All Years (https://www.dieseltruckresource.com/forums/3rd-generation-ram-non-drivetrain-all-years-101/)
-   -   Lamp Out Driving Me Nutz!!!!! (https://www.dieseltruckresource.com/forums/3rd-generation-ram-non-drivetrain-all-years-101/lamp-out-driving-me-nutz-203814/)

DODGER BOMBER 05-06-2008 05:55 PM

Lamp Out Driving Me Nutz!!!!!
 
I dont know why the heck it keeps doing it, but it does. Its the left rear tail lamp and the signal works,brake works, but no running light. I have replace the bulbs in both sides, and recently i just upgraded to LED'S. And it does not do it all of the time, but its starting to make me mad. I was told it might be the TIPM but that the 03's dont have a TIPM. So What the heck could it be.

Like i said before, it will do it for a day or 2 here and there and some times it wont do it for a month or better. Im confused and i dont want to take it to the dealer for another $1000 bill from them.

bob4x4 05-06-2008 09:08 PM

Inspect the socket,I have had to replace quite a few.

Bob

Megaramasaur 05-06-2008 09:35 PM

My 03 did the same thing.....There is a "computer board"/relay back there that needs to be replaced... I had that annoying ding ding for months that drove me nuts. I got the part from the dealer for less than $40 bucks, replaced it myself, and no more ding, ding, ding, ding....

DODGER BOMBER 05-07-2008 10:05 AM


Originally Posted by bob4x4 (Post 2072600)
Inspect the socket,I have had to replace quite a few.

Bob

Are you talking about the plug that goes into the lite?

DODGER BOMBER 05-07-2008 10:06 AM


Originally Posted by Megaramasaur (Post 2072644)
My 03 did the same thing.....There is a "computer board"/relay back there that needs to be replaced... I had that annoying ding ding for months that drove me nuts. I got the part from the dealer for less than $40 bucks, replaced it myself, and no more ding, ding, ding, ding....

Where abouts is this computer board/relay located?? Is it like a buss connector??

Billm2004 05-07-2008 10:39 AM

i know a lot of times you need resistor for L.E.D.s especially if the are for turn signals. but yes, i have had to replace sockets as well.

ID2500Ram 05-07-2008 12:15 PM

My 03 did the same mysterious, random things. The new circuit/socket boards were $23 apiece and now everything is just fine.

DODGER BOMBER 05-07-2008 12:56 PM

Ya my leds have the resistor built in. Ya and i put new Circut board on my lamps before but it did not fx it. Thats why i bought the new led's. It has not done it in a few days so im hoping it wont do it again and it was just the circut board.

Mr Bee 05-08-2008 04:16 PM

As stated check the socket... Also I am a firm believer in dielectric grease for all socket connections..

hammerjammer 05-08-2008 04:28 PM


Originally Posted by Mr Bee (Post 2074880)
As stated check the socket... Also I am a firm believer in dielectric grease for all socket connections..

You are correct about the dielectric grease ,it prevents high resistance connections,which will trigger the lamp out alarm.


All times are GMT -5. The time now is 08:14 PM.


© 2024 MH Sub I, LLC dba Internet Brands