B&W Hitch and Rear Fender Liners
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: West Virginia
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
B&W Hitch and Rear Fender Liners
I am getting ready to install rear fender liners in my truck. But, I have a B&W turnover ball gooseneck hitch installed. The rod that is pulled to release the ball for turning is blocked by the liner. I would like to know how others have handled this problem. I just can't bring myself to cut a notch in the fender liner. I bet someone here has a neat fix for this ???
#3
Registered User
Yeah, I just cut a little hole in mine. I made it small, and above where it turns in so mud doesn't get slung in there.
If you cut a hole, make sure to knock the corners off where you cut with some sandpaper or something. Otherwise it will skin your hand.
If you cut a hole, make sure to knock the corners off where you cut with some sandpaper or something. Otherwise it will skin your hand.
Thread
Thread Starter
Forum
Replies
Last Post
stroker101
3rd Gen High Performance and Accessories (5.9L Only)
11
03-16-2009 09:38 AM
wanna2500
3rd Generation Ram - Non Drivetrain - All Years
14
01-27-2009 07:42 AM
Fisherguy
3rd Gen High Performance and Accessories (5.9L Only)
5
04-13-2006 09:17 PM