Anyone have problems programming Sentry key?
Registered User
Joined: May 2007
Posts: 79
Likes: 0
And the answer is:
The published procedure only works if your truck has the security system installed. If not, then on the second step, you must wait until the "MIL" lamp starts to flash. Then pull the second key and install the third, switch to ON and wait for the single chime.
Done!
CP
The published procedure only works if your truck has the security system installed. If not, then on the second step, you must wait until the "MIL" lamp starts to flash. Then pull the second key and install the third, switch to ON and wait for the single chime.
Done!
CP
Thread Starter
Registered User
Joined: Jan 2007
Posts: 327
Likes: 0
And the answer is:
The published procedure only works if your truck has the security system installed. If not, then on the second step, you must wait until the "MIL" lamp starts to flash. Then pull the second key and install the third, switch to ON and wait for the single chime.
Done!
CP
The published procedure only works if your truck has the security system installed. If not, then on the second step, you must wait until the "MIL" lamp starts to flash. Then pull the second key and install the third, switch to ON and wait for the single chime.
Done!
CP
I give up.
Thread
Thread Starter
Forum
Replies
Last Post
Herr Diesel
3rd Gen High Performance and Accessories (5.9L Only)
9
May 13, 2024 05:44 PM
tool
3rd Generation Ram - Non Drivetrain - All Years
4
Mar 26, 2009 09:00 PM
jrussell
3rd Generation Ram - Non Drivetrain - All Years
26
Jan 21, 2007 06:47 PM
TheFog
3rd Generation Ram - Non Drivetrain - All Years
2
May 3, 2006 06:35 AM