Dodge Diesel - Diesel Truck Resource Forums

Dodge Diesel - Diesel Truck Resource Forums (https://www.dieseltruckresource.com/forums/)
-   3rd Generation Ram - Non Drivetrain - All Years (https://www.dieseltruckresource.com/forums/3rd-generation-ram-non-drivetrain-all-years-101/)
-   -   Anyone got picture of stock stereo rear end? (https://www.dieseltruckresource.com/forums/3rd-generation-ram-non-drivetrain-all-years-101/anyone-got-picture-stock-stereo-rear-end-154387/)

tomm 06-07-2007 11:34 AM

Anyone got picture of stock stereo rear end?
 
I have a Sirius Sportster replay that plays through my stereo via an 8" antenna.

I set the stereo to a certain channel and it picks up the Sirius.

I want to hardwire it to the stereo but cannot figure how to get to the stereos backend to see what kind of plug I need.

Anyone got pics of the stock single cd's backend?
Are there just rca input/output connectors back there?

I've searched and the CD owners manual doesn't show anything.

thanks fellas.....

Mopardan 06-07-2007 02:54 PM

The back of the radio has a small plug. Behind the passenger side kick panel there is a connector that will fit your FM adapter (if that what you have) if your hooking it to the antenna wire.:cool: To take the radio out, take the screw out that holds the little hanger on the pass side. The rest of the dash around the radio pops out. 4 screw and remove the radio.

tomm 06-07-2007 04:07 PM

You rock! thanks Mopar

mikmaze 06-07-2007 04:20 PM

yeah, if it weren't for that one scre that holds the hook to the dash, the dash would fall in your lap on a good bump !

Mopardan 06-07-2007 05:44 PM

Glad I could help if I did. I found out about the connector behind the kick panel from fellow DTRs also. Mine works great hooked up this way.[guitar]

gsbrockman 06-07-2007 09:31 PM


Originally Posted by tomm (Post 1542734)
I have a Sirius Sportster replay that plays through my stereo via an 8" antenna.

I set the stereo to a certain channel and it picks up the Sirius.

I want to hardwire it to the stereo but cannot figure how to get to the stereos backend to see what kind of plug I need.

Anyone got pics of the stock single cd's backend?
Are there just rca input/output connectors back there?

I've searched and the CD owners manual doesn't show anything.

thanks fellas.....

https://www.dieseltruckresource.com/...ighlight=metra

Greg


All times are GMT -5. The time now is 11:22 AM.


© 2024 MH Sub I, LLC dba Internet Brands