4th gen wheels on 3rd.
#1
4th gen wheels on 3rd.
New to this. Wondering if there are any issues at all when putting 20” 4th gen wheels on my 3rd gen. 2008 ram 2500.
Also id love to see some pictures with that setup!
Also id love to see some pictures with that setup!
#3
Registered User
The 4ths have more backspacing than the 3rds. The wheels will be hugging the body closer.
I know control arm clearance could be an issue depending on the width of the tire.
20's are going to adversely affect the ride over a 17" or 18".
I know control arm clearance could be an issue depending on the width of the tire.
20's are going to adversely affect the ride over a 17" or 18".
#4
Registered User
Danderson is correct, If you use, may need to get 1/2 inch to 1 inch wheel spacers to get them baddies looking normal. My Neighbor has 20's on his truck, don't like the backspacing.
Thread
Thread Starter
Forum
Replies
Last Post
V10nacuda
3rd Generation Ram - Non Drivetrain - All Years
3
07-21-2011 03:17 PM
03CTDCO
3rd Generation Ram - Non Drivetrain - All Years
1
05-28-2011 05:31 PM
hovisimo
3rd Generation Ram - Non Drivetrain - All Years
91
02-19-2011 11:47 PM
sharp21
3rd Generation Ram - Non Drivetrain - All Years
2
12-09-2010 12:13 AM
Blake Clark
4th Gen Ram -Non Drivetrain- 2010 and Up
4
05-17-2010 05:23 AM