2004.5 Cruise Control
#1
Registered User
Thread Starter
Join Date: Feb 2010
Location: Isle of Wight Va
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
2004.5 Cruise Control
Need some help? Cruise control quit working.
Back Story: Had to replace both ABS Sensiors after towing my RV smoked the front brakes, trailer brake controler was not working right but that been repaired. Cruise worked before that now the cruise is not engauging. Cruise turns on I think curise lights up on the dash.
Back Story: Had to replace both ABS Sensiors after towing my RV smoked the front brakes, trailer brake controler was not working right but that been repaired. Cruise worked before that now the cruise is not engauging. Cruise turns on I think curise lights up on the dash.
#2
Administrator/Jarhead
First thing I would check is the connector on the vacuum pump (passenger side of the firewall under the hood) and the vacuum lines running under the sound matting from the pump to the actuator. I broke my vacuum line once just by bumping into it. The pump would still run, but would not draw enough vacuum to engage the cruise.
If this isn't it, message me and I'll look up the trouble shooting procedures.
If this isn't it, message me and I'll look up the trouble shooting procedures.
Thread
Thread Starter
Forum
Replies
Last Post
mokragleski
Towing and Hauling / RV
5
12-15-2015 10:56 PM
marksf
3rd Gen Engine and Drivetrain -> 2003-2007
6
07-04-2011 10:28 PM
Landini1
3rd Gen Engine and Drivetrain -> 2003-2007
3
03-06-2009 07:01 PM