3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

05 with 37K,clunk or "pop" in front end?

Old Jul 26, 2007 | 03:34 PM
  #1  
ogopogo's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 17
Likes: 0
05 with 37K,clunk or "pop" in front end?

My 05 ram has developed a loud pop coming from the front end when I am driving it,seems to do it when turning or pulling into driveways etc.I had a quick look and the tie rod that bolts to the steering arm seems to have some play as well as the track bar where it attaches on the lower pass side.i went to the local parts store and they didnt have a listing for these parts under MOOG,are these dealer only right now?What else might be making the noise?I should mention I have a 6inch top gun customz lift kit on the truck as well as 37inch toyos,thanks!!
Reply
Old Jul 26, 2007 | 03:51 PM
  #2  
Pooter's Avatar
Registered User
 
Joined: Dec 2005
Posts: 2,627
Likes: 0
From: DFW, TX
Have you also double checked all your bolts after doing the lift?

I had a little knock noise going over bumps at slow speeds, one of the upper control arms had come loose, quite a bit actually.
I went over ALL the bolts on the front end and found a few that could stand to be tighter, it firmed up the front end, no more noises...

Also too, check your ball joints(jack up one front wheel, check for up/down play)
Reply
Old Jul 26, 2007 | 04:43 PM
  #3  
Wulfdiesel's Avatar
Registered User
 
Joined: Aug 2006
Posts: 198
Likes: 0
From: San Diego, CA
my truck is stock height and stock tires...seems to make the same noise @ 30K...ONLY when turning left @ low speeds
i got under the front end and wiggled everything by hand..nothing moved even slightly...so i have no clue what it is
guess it wouldnt hurt to climb under there and just torque the bejesus out of everythin on the front end though.
Reply
Old Jul 26, 2007 | 04:46 PM
  #4  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
I've replaced 3 tie rod ends in my truck, replaced the same one twice in the past 10k miles....ironically all of this started right after my leveling kit was installed.
Reply
Old Jul 27, 2007 | 12:40 AM
  #5  
ogopogo's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 17
Likes: 0
Im going to get under there tomorrow and double check all the lift kit fasteners first and change out the steering arm tie rod.I bought one for a 04 as they didnt list an 05 one,anybody know if they are the same or have the moog part #s for the 05 tie rods and track bar?973604x4,which tie rods are wearing out?
Reply
Old Jul 27, 2007 | 12:45 AM
  #6  
THURENfab.'s Avatar
Registered User
 
Joined: Oct 2004
Posts: 371
Likes: 0
Trackbar/trackbar drop bolts are most likely not tight enough... You have to K I L L them!!

Reply
Old Jul 27, 2007 | 02:02 AM
  #7  
bsj04's Avatar
Registered User
 
Joined: Dec 2006
Posts: 337
Likes: 1
From: fort worth TX
mine was poping after i put my wheels and tiers on and it was the track bar bushings. you can but them at napa for about $15 each and they press in
Reply
Old Jul 27, 2007 | 02:35 AM
  #8  
nutt4outdoors's Avatar
Registered User
 
Joined: Oct 2005
Posts: 14
Likes: 0
From: Beach City, Texas
Order one of Don's (Thuren Fabrication) trackbars. It is worth every $!!!
Reply
Old Jul 27, 2007 | 09:15 AM
  #9  
Wulfdiesel's Avatar
Registered User
 
Joined: Aug 2006
Posts: 198
Likes: 0
From: San Diego, CA
Originally Posted by THURENfab.
Trackbar/trackbar drop bolts are most likely not tight enough... You have to K I L L them!!

can someone post pics of the bolts that need tightening?
Reply
Old Jul 27, 2007 | 09:20 AM
  #10  
973604x4's Avatar
Banned
 
Joined: Apr 2006
Posts: 3,141
Likes: 0
From: College Station, Texas
Originally Posted by ogopogo
Im going to get under there tomorrow and double check all the lift kit fasteners first and change out the steering arm tie rod.I bought one for a 04 as they didnt list an 05 one,anybody know if they are the same or have the moog part #s for the 05 tie rods and track bar?973604x4,which tie rods are wearing out?
the one nearest the steering box....i forget the exact terminology...it has worn out twice now.
Reply
Old Jul 27, 2007 | 09:23 AM
  #11  
Pooter's Avatar
Registered User
 
Joined: Dec 2005
Posts: 2,627
Likes: 0
From: DFW, TX
Originally Posted by Wulfdiesel
can someone post pics of the bolts that need tightening?
Id go over everything, always a good idea to check and make sure the bolts are tight.
Reply
Old Jul 27, 2007 | 09:27 AM
  #12  
jlibert's Avatar
Registered User
 
Joined: Dec 2006
Posts: 842
Likes: 0
From: Fresno, Ca
mine was making some noises, had to retorque to shock bolts
Reply
Old Jul 28, 2007 | 12:30 PM
  #13  
ogopogo's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 17
Likes: 0
Well I retorqued everything(nothing really was loose) and the noise seems to be gone so far,If it is gone I,m going to assume I hadnt "killed" the track bar bolts enough the first time.thanks guys!
Reply
Old Jul 28, 2007 | 01:46 PM
  #14  
Jmac's Avatar
Chapter President
 
Joined: Mar 2004
Posts: 847
Likes: 0
From: North Central Florida
Originally Posted by ogopogo
Well I retorqued everything(nothing really was loose) and the noise seems to be gone so far,If it is gone I,m going to assume I hadnt "killed" the track bar bolts enough the first time.thanks guys!
When I put on my lift kit on my 04.5, I had this same problem. I learned that I had to use a cheater bar and 2 gorillas to tighten the trackbar bolts to the point of nuclear fusion. Then I had no more pops on binding noises.
Jamie
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Cummins610
4500 / 5500 - Chassis Cab Trucks
17
May 29, 2010 12:50 AM
dieselJon
Other
1
Nov 21, 2007 05:53 PM
973604x4
3rd Generation Ram - Non Drivetrain - All Years
5
Sep 4, 2007 08:18 PM
MasseyMan1089
12 Valve Engine and Drivetrain
12
May 23, 2007 07:56 PM
Gypsyman
3rd Gen Engine and Drivetrain -> 2003-2007
6
Aug 27, 2004 04:32 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:31 PM.