03 2500 ignition/dash issues
#1
03 2500 ignition/dash issues
I went to start the truck yesterday and got nothing when I turned the key to the ON and START positions. The dash lights go out and the truck doesnt start. I can start it with the remote start, but when I put the key in and push the brake, the truck dies.
I have checked all fuses, replaced the ignition switch, removed the Edge chip, and still nothing.
Any ideas would be appreciated.
Thanks,
Adam
I have checked all fuses, replaced the ignition switch, removed the Edge chip, and still nothing.
Any ideas would be appreciated.
Thanks,
Adam
#3
Registered User
Back to morning brew . . .
#7
Registered User
Might be a bad connection at the remote start, the ignition feed that puts 12v to the remote starter to signal that you have just put in the key. If that circuit is doing what it's supposed to, I think I'd suspect the remote start module too.
Thread
Thread Starter
Forum
Replies
Last Post
NJMurvin
3rd Generation Ram - Non Drivetrain - All Years
4
01-14-2010 07:59 PM
NoSparkplugs
3rd Generation Ram - Non Drivetrain - All Years
17
05-17-2009 10:36 PM
KATOOM
2nd Gen. Dodge Ram - No Drivetrain
8
04-23-2003 06:53 PM