$375 to spend
#1
Registered User
Thread Starter
Join Date: Jan 2008
Location: Houston
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
$375 to spend
Ok so I got a little extra money to buy a few things. Which would you guys get out of my sig? Pocket Flares or both sets of lights?
Keep in mind I don't have the front bumper so the PIAA's would just sit in the shed.
Keep in mind I don't have the front bumper so the PIAA's would just sit in the shed.
#2
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
If you're gonna keep the truck a few years you should look at ATS flares instead of BW's which will eventually eat through your paint.
I put ATS flares on, they're held to the body side with 2 sided tap so they shouln't eat through your paint.
I put ATS flares on, they're held to the body side with 2 sided tap so they shouln't eat through your paint.
#4
Registered User
Thread Starter
Join Date: Jan 2008
Location: Houston
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
I'll be keeping it until the day it falls into a million pieces. Even once I do buy another truck or car, I will turn this into a deerlease truck. I looked at the ATS flares but I didn't really like them. I could also put some 3m Tape behind the BW flares for some extra padding too couldnt I?
Mark,
I got a Drag Banshee that runs on Alky for going fast lol.... But I am trying to sell it....
Mark,
I got a Drag Banshee that runs on Alky for going fast lol.... But I am trying to sell it....
#6
Registered User
Thread Starter
Join Date: Jan 2008
Location: Houston
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered User
Join Date: Feb 2004
Location: Surrey BC Canada (it's not that bad eh!)
Posts: 3,640
Likes: 0
Received 0 Likes
on
0 Posts
I'll be keeping it until the day it falls into a million pieces. Even once I do buy another truck or car, I will turn this into a deerlease truck. I looked at the ATS flares but I didn't really like them. I could also put some 3m Tape behind the BW flares for some extra padding too couldnt I?
I don't know, is there a square edge for the tape to go on to? You like the fake screw things?
Trending Topics
#8
Registered User
Join Date: Dec 2008
Location: North Texas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Thats probably what I would buy, they will make your truck look pretty sharp. Mine have already rubbed trought the paint and I used some clear tape on them to keep the fenders from rusting, but I don't worry about it, I will never pull them off, if they crack or break down the road I will c if I can get them line-x'd. I got ripped off on some Friday $399+tax
#9
Registered User
Thread Starter
Join Date: Jan 2008
Location: Houston
Posts: 1,719
Likes: 0
Received 0 Likes
on
0 Posts
I don't know if there is a flat spot or not on them... I do like the fake screw things. I think they give it a little extra style vice the plain flares.
So you just got your last week an they have already rubbed through the paint?
So you just got your last week an they have already rubbed through the paint?
#11
Blake gave me an "A" for effort!
Join Date: Apr 2008
Location: Indiana
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
I would keep that $375 in the bank to pay for troubles down the road..
That will cover having your rear axle seals replaced. Had to have mine replaced at 40K and they weren't covered by warranty anymore..
But, since guys with money usually don't think reasonably I would put that money towards at MBRP cool dual exhaust!!
That will cover having your rear axle seals replaced. Had to have mine replaced at 40K and they weren't covered by warranty anymore..
But, since guys with money usually don't think reasonably I would put that money towards at MBRP cool dual exhaust!!
#13
Registered User
Out of your "coming soon" list I'd go with the smoked cab lights.....
If i had 375 that i had to spend on the truck.... here's what i would do
Gauges
Bedliner
katskins
STU Paddles for the dunes
HID Lights
If i had 375 that i had to spend on the truck.... here's what i would do
Gauges
Bedliner
katskins
STU Paddles for the dunes
HID Lights
#15
Registered User
Join Date: Dec 2008
Location: North Texas
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
On the ones from my truck they don't have the flat edge on the inside, they have a black trim gasket for the seal, that's why I used clear tape. The new ones I haven't received yet should get them on Thursday