6.7 silencer ring
07-04-2007, 10:02 AM
#2
Registered User
Join Date: Sep 2006
Location: Middletown In.
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
I found this in another thread started on them. I hope this works for you.
Quote:
Originally Posted by proworks1
I ordered the parts to make my cold air intake on my 6.7 and I was wanting to know if there is anyone out there that has removed their silencer ring yet, If so could you let me know how to remove it.. Thanks in advance for any info.
Take the air intake hose off the turbo and you'll see the silencer inside the turbo held in by a snap ring, remove the snap ring and the silencer falls out. Be careful not to scratch the inside of the turbo up and pay attention to where the paint marks are so you can put it back if it needs servicing.
__________________
2001 3/4 ton 5" skyjacker 38x15.50x17 ssr's
2005 3/4 ton with quadzilla box
2005 king quad fully modified for mud
Quote:
Originally Posted by proworks1
I ordered the parts to make my cold air intake on my 6.7 and I was wanting to know if there is anyone out there that has removed their silencer ring yet, If so could you let me know how to remove it.. Thanks in advance for any info.
Take the air intake hose off the turbo and you'll see the silencer inside the turbo held in by a snap ring, remove the snap ring and the silencer falls out. Be careful not to scratch the inside of the turbo up and pay attention to where the paint marks are so you can put it back if it needs servicing.
__________________
2001 3/4 ton 5" skyjacker 38x15.50x17 ssr's
2005 3/4 ton with quadzilla box
2005 king quad fully modified for mud
Thread
Thread Starter
Forum
Replies
Last Post
RonP
3rd Gen Engine and Drivetrain -> 2003-2007
6
02-17-2010 09:30 AM
RRC
3rd Gen Engine and Drivetrain -> 2003-2007
2
05-13-2007 11:45 PM