6.7 dual cp3, airdog 150 and vent mod
12-15-2008, 09:01 PM
#1
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
6.7 dual cp3, airdog 150 and vent mod
just got done doing a PPE dual cp3, vent mod and ad150 on a 07 6.7. also has dpf delete, egr delete
bed off and stock canister removed
liberty canister mod
aluminum pickup inside the liberty canister
everything on the tank side is done
stainless steel plug we machined to cap off the factory feed line
bed off and stock canister removed
liberty canister mod
aluminum pickup inside the liberty canister
everything on the tank side is done
stainless steel plug we machined to cap off the factory feed line
12-15-2008, 09:06 PM
#3
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
John starting the dual CP3 install
Routing big lines
2nd CP3 in place
finishing up before we fire it off
all buttoned up and priming system for fire off
we machined a longer fitting for the second feed line. the one that came in the kit was TOO short and could not get a wrench on it. stainless steel!
Routing big lines
2nd CP3 in place
finishing up before we fire it off
all buttoned up and priming system for fire off
we machined a longer fitting for the second feed line. the one that came in the kit was TOO short and could not get a wrench on it. stainless steel!
12-15-2008, 09:11 PM
#4
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
all finished up
took this pic when we fired it up. the truck was running and got the glory shot!
Truck runs great, still waiting on Marco to release the smarty! COME ON MARCO!!! This guy is willing to be a test bed
for ya!!!! hint hint! LOL
There are many more to come with this truck and will release more when we have our dyno day on May 17th! 2nd Annual 10,000 lbft of Torque in the Southwest! Would like to have as many trucks there as possible! We raise money for families of fallen soldiers in conjunction with the Purple Hearts Association. ALL money goes to them, it helps pay for families to come to Albuquerque to receive the memorial. It pays for travel and lodging for the families. Great event for a great cause! Will keep everyone posted on the progress of this truck. Have pretty big plans for it and a TON of one off stuff too.
took this pic when we fired it up. the truck was running and got the glory shot!
Truck runs great, still waiting on Marco to release the smarty! COME ON MARCO!!! This guy is willing to be a test bed
for ya!!!! hint hint! LOLThere are many more to come with this truck and will release more when we have our dyno day on May 17th! 2nd Annual 10,000 lbft of Torque in the Southwest! Would like to have as many trucks there as possible! We raise money for families of fallen soldiers in conjunction with the Purple Hearts Association. ALL money goes to them, it helps pay for families to come to Albuquerque to receive the memorial. It pays for travel and lodging for the families. Great event for a great cause! Will keep everyone posted on the progress of this truck. Have pretty big plans for it and a TON of one off stuff too.
Trending Topics
12-19-2008, 09:19 AM
#10
Registered User
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,627
Likes: 0
Received 0 Likes
on
0 Posts
12-19-2008, 09:31 AM
#13
Chapter President
Thread Starter
Join Date: Apr 2007
Location: misplaced Idahoan stuck in Albuquerque, Roughneckin on RIG 270
Posts: 9,375
Likes: 0
Received 6 Likes
on
4 Posts
we have a tripple dog coming in the mail now. until now, he is inpatiently waiting for the smarty. COME ONE MARCO!! LOL....
or should I say, COME ON DODGE, QUIT MAKING UPDATES SO MARCO CAN RELEASE THE SMARTY!!!!
or should I say, COME ON DODGE, QUIT MAKING UPDATES SO MARCO CAN RELEASE THE SMARTY!!!!
