forthcomingtwin

how about dropping a valve seat...................... i speak from experience

AK RAM

Would this be too hot?

StevenB05

Is 3927* your egt temp.....

thejeepdude

It's a glitch. Your probe would be melted at that temp.

AK RAM

I'm running dual injection pumps in tandem, dual fuel rails with each rail feeding only three injectors, BullyDog Downloader Crazy Larry Program stacked with the TST on 8/8, EDM injectors, Edge EZ set on the secret level 6......laid down 1024 hp and 2300 ft lbs torque.


Yeah....you're right. Has done it twice now. Was still hoping for the Guinness Book though.

thejeepdude

Yeah that is pretty funny. So is there any word from Bullydog as to why it does that? Or do they sound like DC... "um, yeah, that's normal"

AK RAM

Haven't asked them. It did it once about 6 months ago. Time went by and it didn't do it again so I never gave it another thought. It did it again yesterday so I just had to get a picture. I'll have to give them a call when I get a chance.

AK RAM

Couldn't resist.

cga97

This doesn't make a whole lot of sense, but have to ask....do the temps change dependent on the depth of the temp probe? I just installed mine yesterday and put the probe somewhat in the middle, but there was a lot of room for adjustment. Temps seemed to register fine---300 at idle, 600 and dropping at idle after a 10 min drive, 1100 at wot but only 55mph(didn't want to speed too much). I'm am sure I will see higher when my quad arrives (hopefully this week).

Lary Ellis (Top)