3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

south bend clutch chatter

Old Mar 6, 2007 | 08:21 PM
  #1  
06dodgedrw's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 322
Likes: 0
From: ma
south bend clutch chatter

Is there any 1 else on here running a 3600 DD 12CB clucth on the g56 trans? mine at low rpm chatters and vibrates the truck under a little load and is worse when the motor is under a heavy load from 1000rpm-1800rpm and is the worst in 5th gear to the point of vibrating the truck to the point that the abs light comes on any thing over 1800rpm the clutch is fine any 1 have any ideas or is this typical with the dd?
Reply
Old Mar 6, 2007 | 09:07 PM
  #2  
danshsss's Avatar
Registered User
 
Joined: Jun 2003
Posts: 145
Likes: 0
From: San Juan Bautista
This is normal with a DD clutch because they dont have the shock springs in the clutch plates ,they are just solid and all the noise and vibration get transmitted straight thru the tranny.. Plus the floater plate will rattle also.
Southbend just came out with a new DD with the springs.
Reply
Old Mar 7, 2007 | 06:32 AM
  #3  
wap's Avatar
wap
Registered User
 
Joined: Aug 2005
Posts: 3,563
Likes: 1
From: Ga.
I have that clutch, but with springs.

I wouldnt think you would want your truck under heavy load at 1000rpms anyway.

Not to be smart, but it seems that you just need to keep you rpms up.

Mine does chatter and make some noise but nothin like what you described.
Reply
Old Mar 7, 2007 | 03:22 PM
  #4  
06dodgedrw's Avatar
Thread Starter
Registered User
 
Joined: May 2006
Posts: 322
Likes: 0
From: ma
im not sayin im wailling on it startiing at 1000rpm its like you com out of the light and the rice burner wants to go and you get into it even when im just cruizin and get into the throttle a little bit it vibrates the hole truck.
Reply
Old Mar 7, 2007 | 04:34 PM
  #5  
wap's Avatar
wap
Registered User
 
Joined: Aug 2005
Posts: 3,563
Likes: 1
From: Ga.
Maybe you can call Peter and see if he can help you.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Hired Gun
24 Valve Engine and Drivetrain
32
Feb 26, 2007 09:19 AM
biglar
Performance and Accessories 2nd gen only
8
Nov 20, 2006 10:08 PM
J.R. Adkins
Performance and Accessories 2nd gen only
19
Apr 15, 2003 10:38 PM
Performance and Accessories 2nd gen only
29
Jan 21, 2003 10:23 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:06 AM.